Labels Milestones
BackL=slider_spacing*10-1, th=1); v_wall(h=4, l=height-rail_clearance*2-thickness, th=thickness*1.25); v_wall(h=4, l=height-rail_clearance*2, th=right_rib_thickness); // top right [left_edge + height * rotate_vector_cos, rotate_vector_sin * rail_depth] // top horizontal rib h_wall(h=4, l=right_rib_x); // middle horizontal rib h_wall(h=4, l=right_rib_x); // bottom horizontal rib h_wall(h=1.6, l=right_rib_x); // middle horizontal rib h_wall(h=4, l=right_rib_x); // middle-bottom h rib h_wall(h=1.6, l=right_rib_x); // one more vertical to mount a circuit outside the full dev board (in some cases) Arduino + DAC https://www.youtube.com/watch?v=t3kUPjdiq0o for explainer https://drive.google.com/drive/folders/156nn9rClRLJplS4M46s56-Pibi86Z-Kp for schematics and .ino file uses an arduino nano clone (atmega 328p), 12-bit dac (mcp4726) and small amounts of supporting hardware Microcontroller and smoothed PWM https://kassu2000.blogspot.com/2019/10/quantizer.html using a gate. If nothing is plugged into the gate of the Pelorinho