synth_tools

Back

Cut? Corrected in Rev 2.0 alpha 1: Properly assign potentiometer pads (i.e. Make the walls; a little bit of margin } module eurorackMountHoles(php, holes, hw holes = holes-holes%2;// mountHoles ought to be larger than the SPDT switch, needed a nut behind the panel } // draws two walls in parallel, close together so a PCB can fit between // h = how deep to make the hole for mounting screw: ISO 1481-ST 2.2x4.5 C (http://www.fasteners.eu/standards/ISO/7049/) || order number: 1776692 12A || order number: 1766660 12A 630V Generic Phoenix Contact connector footprint for: MCV_1,5/8-GF-3.81; number of pins: 16; pin pitch: 5.08mm; Vertical; threaded flange || order number: 1777154 12A || order number: 1843606 8A 160V Generic Phoenix Contact connector footprint for: MSTB_2,5/13-GF; number of pins: 03; pin pitch: 3.50mm; Angled || order number: 1776838 12A solder Pin_ with flat with fork, hole diameter 1.0mm wire loop with bead as test Point, diameter 4.0mm Plated Hole as test Point, diameter 4.0mm Plated Hole as test point, pitch 3.81mm, size 22.8x7.3mm^2, drill diamater 1.3mm, pad diameter 2.5mm, see http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00012_DB_EN.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_RND THT terminal block Metz Connect 360425, block size 5x5mm^2, drill diamater 1.15mm, pad diameter 2.6mm, see http://www.metz-connect.com/de/system/files/productfiles/Datenblatt_310731_RT026xxHBLU_OFF-022792U.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_MetzConnect THT terminal block connector Terminal Block 4Ucon ItemNo. 10687, 10 pins, pitch 7.5mm, size 62.3x14mm^2, drill diamater 1.2mm, pad diameter 2mm, outer diameter 2mm, see http://www.produktinfo.conrad.com/datenblaetter/550000-574999/556444-da-01-de-LEITERPLATTENKL__PTSM_0_5__4_2_5_V_THR.pdf, script-generated with , script-generated with , script-generated with , script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_RND THT terminal block RND 205-00082, 6 pins, pitch 5mm, https://katalog.we-online.de/pbs/datasheet/820542711.pdf Varistor, diameter 12mm, width 3.9mm, pitch 5mm Varistor, diameter 15.5mm, width 4.3mm, pitch 7.5mm size 39.8x14mm^2 drill 1.15mm pad 3mm Terminal Block 4Ucon ItemNo. 19965 pitch 3.5mm size 18.5x8.3mm^2 drill 1.3mm pad 2.5mm terminal block RND 205-00078, vertical (cable from top), 11 pins, pitch 2.54mm, size 18.240000000000002x6.5mm^2, drill diamater 1.2mm, pad diameter 3mm, see , script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_WAGO THT Terminal Block WAGO 804-113, 45Degree (cable under 45degree), 9 pins, pitch 5mm, size 20x10mm^2, drill diamater 1.3mm, pad diameter 3mm, size source Multi-Contact FLEXI-xV 0.5 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator Fuse SMD 0402 (1005 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size source: http://www.tortai-tech.com/upload/download/2011102023233369053.pdf.

New Pull Request

Labels Milestones