synth_tools

Back

Laying, 1 Tap, Diameter 9mm, Amidon, T30, Transformer Toroid tapped horizontal laying 1 Tap Diameter 10 5mm Amidon T44 Transformer, Toroid, horizontal, laying, 1 Tap, Diameter 10,5mm, Amidon T37, Transformer Toroid horizontal laying Diameter 14mm Amidon T50 Transformer, horizontal core with bobbin, 6 pin, https://www.winsen-sensor.com/d/files/semiconductor/mq-6.pdf Sensair S8 Series CO2 sensor, 1kHz PWM output, Modbus, THT co2 gas sensor pwm modbus Sensirion SCD4x QFN, 20 Pin, RGY0020A (https://www.ti.com/lit/ds/symlink/txb0108.pdf#page=33 Texas RSE0010A UQFN, 10 Pin (http://www.ti.com/lit/gpn/tps63030#page=24), generated with kicad-footprint-generator Soldered wire connection, for 2 times 0.75 mm² wire, basic insulation, conductor diameter 0.65mm, outer diameter 2.3mm, size source Multi-Contact FLEXI-E 0.75 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times 0.1 mm² wires, reinforced insulation, conductor diameter 0.9mm, outer diameter 3.5mm, hole diameter 1.6mm Diode, DO-34_SOD68 series, Axial, Vertical, pin pitch=5.08mm, , length*diameter=4*2mm^2, , http://www.diodes.com/_files/packages/DO-35.pdf Diode DO-35_SOD27 series Axial Horizontal pin pitch 27.50mm length 29mm diameter 13mm Electrolytic Capacitor C, Disc series, Radial, pin pitch=7.50mm, , length*width=9*3.6mm^2, Capacitor, https://en.tdk.eu/inf/20/20/db/fc_2009/MKT_B32560_564.pdf C Rect series Radial pin pitch 5.00mm length 7.2mm width 8.5mm Capacitor C, Rect series, Radial, pin pitch=28.80mm, , diameter=29.8mm, muRATA, 1400series, http://www.murata-ps.com/data/magnetics/kmp_1400.pdf Inductor Radial series Radial pin pitch 10.00mm length 11.0mm width 2.8mm solder Pin_ loose fit solder Pin_ with flat with hole, hole diameter 0.9mm wire loop with bead as test Point, square 3.0mm side length SMD pad as test point, pitch 5.08mm, hole diameter 1.0mm, hole diameter 1.0mm wire loop as test point, pitch 5.08mm, size 20.3x10.6mm^2, drill diamater 1.3mm, pad diameter 3mm, see , script-generated with , script-generated with , script-generated with , script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_Phoenix THT Terminal Block Phoenix PT-1,5-4-3.5-H, 4 pins, pitch 5mm, size 25x9mm^2, drill diamater 1.3mm, pad diameter 2.1mm, see http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00232_DB_EN.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_WAGO THT Terminal Block Phoenix MPT-0,5-2-2.54 pitch 2.54mm size 10.6x6.2mm^2 drill 1.1mm pad 2.1mm terminal block RND 205-00006, 7 pins, pitch 7.5mm, size.

New Pull Request

Labels Milestones