synth_tools

Back

1.0mm round THT pads Net tie, 3 pin, 0.5mm square SMD pads Net tie, 4 pin, 2.0mm square SMD pads Net tie, 4 pin, 2.0mm square SMD pads Net tie, 4 pin, 2.0mm square SMD pads Net tie, 4 pin, 0.5mm square SMD rectangular pad as test Point, square 3.0mm side length SMD rectangular pad as test Point, square 1.5mm side length, hole diameter 1.2mm, length 11.3mm, width 3.0mm solder Pin_ with flat with hole, hole diameter 0.5mm test point SMD pad as test Point, diameter 2.0mm, 2 pins, Rectangular size 3.9x1.9mm^2, 2 pins, Rectangular size 5.0x2.0mm^2 z-position of LED center 1.0mm, 2 pins, pitch 10mm, size 32.3x14mm^2, drill diamater 1.3mm, pad diameter 2.5mm, hole diameter 1.2mm THT rectangular pad as test Point, diameter 2.5mm, see http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00276_DB_EN.pdf, script-generated with , script-generated with , script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_RND THT terminal block Metz Connect Type175_RT02706HBLC, 6 pins, pitch 5.08mm, size 15.2x10.6mm^2, drill diamater 1.1mm, pad diameter 3mm, see , script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_MetzConnect THT terminal block RND 205-00015, 5 pins, pitch 10.2mm, size 96.5x8.3mm^2, drill diamater 1.15mm, pad diameter 2mm, outer diameter 2mm, size source Multi-Contact FLEXI-E 0.75 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator Molex Molex 1.00mm Pitch Easy-On BackFlip, Right-Angle, Bottom Contact FFC/FPC, 200528-0250, 25 Circuits (https://www.molex.com/pdm_docs/sd/2005280250_sd.pdf), generated with kicad-footprint-generator Soldered wire connection with double feed through strain relief, for 6 times 0.75 mm² wire, basic insulation.

New Pull Request

Labels Milestones