synth_tools

Back

PCB (will affect choice of sitching hardware). Consider aesthetics and prcticality of stand-offs from front panel. This can be found at https://www.gme.cz/data/attachments/dsh.511-795.1.pdf LED automotive super flux 7.62mm LED_SideEmitter_Rectangular, Rectangular, SideEmitter, Rectangular size 4.5x1.6mm^2 2 pins LED diameter 5.0mm z-position of LED center 3.0mm, 2 pins, http://cdn-reichelt.de/documents/datenblatt/A500/LED8MMGE_LED8MMGN_LED8MMRT%23KIN.pdf LED diameter 5.0mm z-position of LED center 6.0mm, 2 pins diameter 1.8mm size 1.8x2.4mm^2 z-position of LED center 3.0mm, 2 pins, pitch 5mm, size 50x9mm^2, drill diamater 1.15mm, pad diameter 3mm, see http://www.produktinfo.conrad.com/datenblaetter/550000-574999/556441-da-01-de-LEITERPLATTENKL__PTSM_0_5__8_2_5_H_THR.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_Phoenix THT Terminal Block WAGO 236-609 45Degree pitch 5mm size 15x10.2mm^2 drill 1.2mm pad 3mm single screw terminal block RND 205-00301 pitch 10mm size 115x9mm^2 drill 1.3mm pad 2.5mm terminal block Metz Connect Type171_RT13704HBWC pitch 7.5mm Varistor, diameter 7mm, width 3.4mm, pitch 5mm size 21.5x15mm^2 drill 1.2mm pad 3mm Terminal Block Phoenix PTSM-0,5-7-2.5-V-THR, vertical (cable from top), 2 pins, http://www.kingbright.com/attachments/file/psearch/000/00/00/L-169XCGDK(Ver.9B).pdf LED_Rectangular Rectangular Rectangular size 4.8x2.5mm^2 diameter 2.0mm test point SMD pad as test Point, square 4.0mm side length, hole diameter 1.2mm THT pad rectangle square SMD pads Net tie, 2 pin, 0.3mm round THT pads Net tie, 2 pin, 2.0mm square SMD pads Net tie, 2 pin, 1.0mm round THT pads Net tie, 4 pin, 0.3mm round THT pads Net tie, 3 pin, 0.5mm square SMD pads Net tie, 2 pin, 0.5mm square SMD pads Net tie, 2 pin, 0.3mm round THT pads Net tie, 2 pin, 0.5mm square SMD pads Net tie, 3 pin, 0.5mm square SMD rectangular pad as test point, pitch 2.54mm, size 25.9x6.2mm^2, drill diamater 1.2mm, pad diameter 2.5mm, see http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00023_DB_EN.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_MetzConnect THT terminal block RND 205-00244 pitch 10.2mm size 55.9x8.3mm^2 drill 1.3mm pad 2.5mm terminal block RND 205-00299 pitch 10mm size 115x9mm^2 drill 1.3mm pad 2.6mm Terminal Block Phoenix MKDS-1,5-16-5.08.

New Pull Request

Labels Milestones