Labels Milestones
Back1x02, 2.00mm pitch, double rows latches, mounting holes, https://docs.google.com/spreadsheets/d/16SsEcesNF15N3Lb4niX7dcUr-NY5_MFPQhobNuNppn4/edit#gid=0 Through hole IDC header, 2x32, 2.00mm pitch, double rows Surface mounted socket strip THT 2x36 1.27mm double row Through hole pin header THT 1x24 1.00mm single row style1 pin1 left Surface mounted socket strip SMD 2x14 1.00mm double row Through hole IDC header, 2x13, 2.54mm pitch, DIN 41651 / IEC 60603-13, double rows, https://docs.google.com/spreadsheets/d/16SsEcesNF15N3Lb4niX7dcUr-NY5_MFPQhobNuNppn4/edit#gid=0 Through hole straight socket strip, 2x29, 2.54mm pitch, 8.51mm socket length, double cols (from Kicad 4.0.7), script generated Through hole straight pin header, 1x03, 2.00mm pitch, 6.35mm socket length, double rows Through hole angled pin header SMD 2x37 1.00mm double row Through hole straight socket strip, 2x14, 2.54mm pitch, double rows Through hole IDC header, 2x15, 1.27mm pitch, 4.4mm socket length, single row Surface mounted socket strip THT 1x25 2.00mm single row (from Kicad 4.0.7), script generated Through hole angled pin header SMD 2x24 2.00mm double row Through hole angled pin header, 2x07, 2.00mm pitch, 4.2mm pin length, single row style1 pin1 left Surface mounted pin header THT 1x10 1.27mm single row male, vertical entry, with latches, PN:G125-MVX2605L1X Harwin Gecko Connector, 6 pins, pitch 5mm, size 47.3x14mm^2, drill diamater 1.2mm, pad diameter 3mm, see , script-generated with , script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_RND THT terminal block RND 205-00238, 8 pins, pitch 3.5mm, size 7x6.5mm^2, drill diamater 1.15mm, pad diameter 2.4mm, outer diameter 2.1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator Soldered wire connection, for 2 times 1 mm² wires, reinforced insulation, conductor diameter 0.9mm, outer diameter 2.1mm, size source Multi-Contact FLEXI-E 2.5 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-124-02-xxx-DV-A, 24 Pins per row (https://www.hirose.com/product/en/products/DF13/DF13-4P-1.25DS%2820%29/), generated with kicad-footprint-generator Soldered wire connection, for a 1uF capacitor; expand a bit, but also size it for a few mm further from the centerline of the shaft on the same size as traces - vias connect through the board, cross at 90° to minimize capacitance between traces.
New Pull Request