synth_tools

Back

12w DCDC-Converter, TRACO, TEN10-xxxx, https://assets.tracopower.com/20171102100522/TEN10/documents/ten10-datasheet.pdf DCDC-Converter TRACO THN 10 to 30W, Single or dual Output, (https://www.tracopower.com/sites/default/files/products/datasheets/thn30_datasheet.pdf DCDC-Converter TRACO TMR1-xxxx Dual_output DCDC-Converter, TRACO, TMR 1-xxxx, Single output, Rev. March 21.2016 DCDC-Converter TRACO TMR1-xxxx Single_output DCDC SMD XP POWER ISU02 XP_POWER ITQxxxxS-H, SIP, (https://www.xppower.com/pdfs/SF_ITQ.pdf), generated with kicad-footprint-generator Connector Phoenix Contact connector footprint for: MSTBV_2,5/12-GF-5,08; number of steps. Exact configuration TBD. One SPDT switch to set output voltages. (10) One potentiometer for internal clock rate. Arrasta Playbook REP: repique CAX: caixa MSD: mid surdo (sometimes MS1, MS2, etc, if multiple measures or variations) BSD: back surdo (L for low, H for high) R/L: accented note (right/left hand suggested) r/l: quieter note * : trill, generally three very fast notes on updating the two clockwise-most pins, looking from below. Clock rate (B100k) (not sure yet which 2 pins diameter 5.0mm z-position of LED center 1.6mm, 2 pins diameter 5.0mm z-position of LED center 1.0mm, 2 pins, pitch 3.5mm, size 25.5x8.3mm^2, drill diamater 1.3mm, pad diameter 2.5mm, see http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00078_DB_EN.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_WAGO THT Terminal Block WAGO 236-208, 45Degree (cable under 45degree), 8 pins, pitch 7.5mm, size 54.8x14mm^2, drill diamater 1.15mm, pad diameter 2.4mm, see http://www.4uconnector.com/online/object/4udrawing/10690.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_RND THT terminal block RND 205-00045, 2 pins, pitch 5mm, size 30x9.8mm^2, drill diamater 1.3mm, pad diameter 2.1mm, see http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00232_DB_EN.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_WAGO THT Terminal Block Phoenix MKDS-1,5-2-5.08, 2 pins, pitch 5.08mm, size 20.3x8.45mm^2, drill diamater 1.1mm, pad diameter 3mm, see , script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_WAGO THT Terminal Block WAGO 236-102 45Degree pitch 5mm size 80x9.8mm^2 drill 1.3mm pad 2.5mm terminal block RND 205-00029, 8 pins, pitch 5mm, size 65x9mm^2, drill diamater 1.1mm, pad diameter 2.5mm, see http://www.metz-connect.com/de/system/files/productfiles/Datenblatt_317011_RT11LxxHGLU_OFF-022798U.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_MetzConnect THT terminal block RND 205-00021 pitch 5mm size 30x7.6mm^2 drill 1.3mm.

New Pull Request

Labels Milestones