3
1
Back

PSU PSU/PSU.md | 5 | 2N3904 | Small Signal NPN Transistor, TO-92 | | | | | | | Tayda | A-826 | | | R31 | 1 | SW_Push | Push button switch, normally open, two pins, 45° tilted D Momentary Switch, single pole double throw, separate symbols 2x5 pin shrouded header 2.54 mm spacing | Tayda | A-962 | | | | | | | | | | | | | | Tayda | A-1955 | | Tayda | A-3186 | | | | | Tayda | A-1121 | | D3, D4, D5, D6, D7, D8, D9, D10 | 8 | 1N4148 | Standard switching diode, DO-35 2x5 pin shrouded header 2.54 mm spacing Pin header 2.54 mm spacing KK254 Molex connector 2 pin Molex connector 2.54 mm spacing | | | | | | | S1 | 1 | 3_pin_Molex_connector | 3 | AudioJack2 | Audio Jack, 2 Poles (Mono / TS *(optional) SIP socket, 2.54 mm, 1x10 Pin header, 2.54 mm, 1x2 (see build notes Change C13 to 10 steps, but limited by decade counter expects CLOCK to pass 1/2 of V+ (i.e. 6v) but many external clock signal, start/stop, manual step button in.

New Pull Request