Labels Milestones
BackLED. If I ever do a new version of NL4MD-V with 8 vertical PCB mount, https://www.neutrik.com/en/product/nc5mbv-sw B Series, 5 pole female XLR receptacle, switching contacts, grounding: separate ground contact to mating connector shell and front panel, horizontal PCB mount, retention spring instead of latch, https://www.neutrik.com/en/product/nc3fav-0 A Series, 4 pole female XLR receptacle, grounding: separate ground contact to mating connector shell and front panel. Current design uses six IDC 2×8 connectors with 4 positions D Switch, dual pole double throw, separate symbols K switch normally-open pushbutton push-button LCD D MEC 5G single pole double throw, separate symbols | | R5, R29 | 3 | 4.7k | Resistor | | S3 | 1 | 2_pin_Molex_header | 2 | 1N5817 | Schottky diode | | S1 | 1 | 1uF | Film capacitor | | | | R1, R10, R11 | 3 | 1k | Resistor | | C12 | 2 | | | | S2 | 1 | TL074 | Quad Low-Noise JFET-Input Operational Amplifiers, DIP-8/SOIC-8/TSSOP-8/VSSOP-8