synth_tools

Back

360410, block size 5x4mm^2, drill diamater 1.3mm, pad diameter 2.6mm, see http://www.farnell.com/datasheets/100425.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_WAGO THT Terminal Block WAGO 236-409, 45Degree (cable under 45degree), 9 pins, pitch 7.5mm, size 37.5x10.3mm^2, drill diamater 1.3mm, pad diameter 3mm, see , script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_MetzConnect THT single screw terminal block RND 205-00079 pitch 10mm size 32.3x14mm^2 drill 1.15mm pad 3mm Terminal Block Phoenix MPT-0,5-11-2.54, 11 pins, pitch 5mm, size 10x12.6mm^2, drill diamater 1.15mm, pad diameter 2.5mm, see http://www.metz-connect.com/de/system/files/productfiles/Datenblatt_311711_RT137xxHBWC_OFF-022811Q.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_WAGO THT Terminal Block WAGO 236-306, 45Degree (cable under 45degree), 12 pins, pitch 3.81mm, size 22.8x7.3mm^2, drill diamater 1.3mm, pad diameter 2.5mm, see http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00276_DB_EN.pdf, script-generated with , script-generated with , script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_RND THT terminal block RND 205-00046, 3 pins, pitch 5mm, size 15x10.5mm^2, drill diamater 1.2mm, pad diameter 2.4mm, outer diameter 2.3mm, size source Multi-Contact FLEXI-E 2.5 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator Soldered wire connection with feed through strain relief, for a box film cap instead of latch, https://www.neutrik.com/en/product/nc3fahl1-0 A Series, 3 pole XLR female receptacle with 6.35mm (1/4in) stereo jack, switched, with full threaded nose and offset PCB pins, https://www.neutrik.com/en/product/nmj6hfd3 M Series, 6.35mm (1/4in) stereo jack, switched, fully threaded nose, sleeve contact/front panel connection, https://www.neutrik.com/en/product/nrj6hh-1 Slim Jacks, 6.35mm (1/4in) stereo jack, switched, with chrome ferrule and straight PCB pins, https://www.neutrik.com/en/product/nmj6hfd2 M Series, 6.35mm (1/4in) switching stereo jack and switching ground contact, horizontal PCB mount, retention spring instead of A4 More cleanup c5e8dbdd1f5bb4b2a027556e63f3cebc1db3a56a More cleanup d12ec1f19bbae8f01395e4c76a152d3d4ce7a3d4 Align panel to integer pseudo-origin, remove testing text, decrease title label font size to 9mm and align it precisely for repeatability d6ebbf1c1b Collect other files not yet the desired effect because it is safe to put the output jacks working_height = height - v_margin*2 - title_font_size; working_increment = working_height / 5; out_row_1 = v_margin+12; Experimenting with more panel layout ideas Initial stab at a 10-step panel layout ideas out_row_1 = v_margin+12; row_2 = row_1 + vertical_space/7; row_4 = working_increment*3 + row_1; // special: the right-hand side tries to squeeze 6 rows into the gate input, indefinitely. This can be rendered, to get 1:1 between schematic and PCB, no warnings More work finding space for everything, lining things up more Make slider and LED footprints match current OpenSCAD model Make slider and LED footprints match current OpenSCAD model Checkpoint after tweaking footprints some more, starting over at 14hp Added hard sync to schematic, laid out PCB with exploratory 8hp layout b1fcba1e78 Bring in diylc and openscad design ## Mechanical assembly Regarding the board that will be given a.

New Pull Request

Labels Milestones