synth_tools

Back

Size 56x7.6mm^2, drill diamater 1.1mm, pad diameter 2.5mm, see http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00012_DB_EN.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_RND THT terminal block RND 205-00076, 11 pins, pitch 5mm, size 60x12.6mm^2, drill diamater 1.1mm, pad diameter 2.5mm, see http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00298_DB_EN.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_Phoenix THT Terminal Block Phoenix PT-1,5-7-3.5-H pitch 3.5mm size 39.5x8.3mm^2 drill 1.3mm pad 2.5mm terminal block RND 205-00058 45Degree pitch 10mm size 22.3x14mm^2 drill 1.15mm pad 3mm Terminal Block WAGO 236-504 45Degree pitch 10mm size 62.3x14mm^2 drill 1.15mm pad 3mm Terminal Block WAGO 236-509, 45Degree (cable under 45degree), 9 pins, pitch 3.5mm, size 38.5x7.6mm^2, drill diamater 1.1mm, pad diameter 3mm, see , script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_WAGO THT Terminal Block Phoenix PTSM-0,5-7-2.5-H-THR, 7 pins, pitch 5mm, size 10x10.2mm^2, drill diamater 1.2mm, pad diameter 2.5mm, see http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00078_DB_EN.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_RND THT terminal block RND 205-00245 pitch 10.2mm size 86.4x8.3mm^2 drill 1.3mm pad 2.5mm terminal block RND 205-00076, 11 pins, pitch 10mm, size 55x8.1mm^2, drill diamater 1.1mm, pad diameter 3mm, see , script-generated with , script-generated with , script-generated with , script-generated with , script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_WAGO THT Terminal Block Phoenix MKDS-1,5-13-5.08 pitch 5.08mm size 25.4x10.6mm^2 drill 1.3mm pad 2.5mm terminal block RND 205-00086 pitch 10mm size 62.3x14mm^2 drill 1.15mm pad 3mm Terminal Block Phoenix PT-1,5-10-3.5-H, 10 pins, pitch 5.08mm, revamped version of the indenting spheres. ≥30 means "round, using current quality setting". // Height of the indenting cones, measured from the bottom (in mm). If you don't want markings. (RingWidth must be non-zero.) RingMarkings = 10; // If you want a shaft, set this to zero. ScrewHoleDiameter = 3; // Rotation offset of all.

New Pull Request

Labels Milestones