Labels Milestones
Back[width_mm-h_margin-working_width/4, row_1, 0]; saw_out = [h_margin + working_width/4, row_1, 0]; f_tune = [width_mm/2 + h_margin, top_row, 0]; f_tune = [second_col, third_row, 0]; saw_out = [output_column, bottom_row, 0]; c_tune = [second_col, first_row, 0]; //Second row interface placement saw_out = [output_column, bottom_row, 0]; pwm_duty = [width_mm - h_margin - working_width/8, row_3, 0]; c_tune = [second_col, fourth_row, 0]; pwm_in = [width_mm - h_margin - working_width/8, row_3, 0]; manual_2 = [left_col, row_5, 0]; cv_in_2a = [left_col, row_2, 0]; pwm_in = [input_column + h_margin/2, bottom_row, 0]; pwm_pot = [input_column - h_margin/2, row_1, 0]; triangle_out = [third_col, fourth_row, 0]; triangle_out = [third_col, third_row, 0]; fm_lvl = [h_margin+working_width/8, row_3, 0]; c_tune = [width_mm/2 + h_margin, top_row, 0]; f_tune = [second_col, second_row, 0]; //Third row interface placement fm_in = [input_column - h_margin/2, bottom_row, 0]; c_tune = [width_mm/2, top_row, 0]; left_rib_x = thickness * 1; right_rib_x = width_mm - right_rib_thickness; Panels/10_step_seq_38hp_v3.2.scad Normal file Unescape Hardware/PCB/precadsr/potsetc.sch Normal file Unescape Schematics/Unseen Servant/Unseen Servant.kicad_sch | 1 | 10R | Resistor | | | | | | | | R9, R11, R13 | 3 | AudioJack2 | Audio Jack, 2 Poles (Mono / TS), Switched T Pole (Normalling)"/>