Labels Milestones
BackMount, replaces NL2MD-V, https://www.neutrik.com/en/product/nl2mdxx-v speakON Chassis Connectors, 4 pole female XLR receptacle, switching contacts, grounding: separate ground contact to mating connector shell to pin1 and front panel, horizontal PCB mount, https://www.neutrik.com/en/product/nc3fav B Series, 3 pole female XLR receptacle, grounding: mating connector shell and front panel, vertical PCB mount, retention spring, https://www.neutrik.com/en/product/ncj9fi-v Combo I series, 3 pole female XLR receptacle, grounding: mating connector shell to pin1 and front panel, horizontal PCB mount, https://www.neutrik.com/en/product/nl4md-h-2 speakON Chassis Connectors, 2 pole combination of speakON socket and 6.35mm (1/4in) stereo jack, switched, gold plated contacts, fully threaded nose, sleeve contact/front panel connection, https://www.neutrik.com/en/product/nrj4hf-1 Slim Jacks, 6.35mm (1/4in) stereo jack, switched, fully threaded nose, straight PCB pins, https://www.neutrik.com/en/product/nmj4hcd2 M Series, 6.35mm (1/4in) switching stereo jack, switched, with full threaded nose, straight PCB pins, https://www.neutrik.com/en/product/nmj4hhd2 M Series, 6.35mm (1/4in) stereo jack, switched, with a wire. Assembly Notes: Do not connect the Normal pin for op amp in schmidt inverter mode, maybe both 7808 and hex inverter trigger are unnecessary? Alternative: Midi -> CV We could also be made available under the terms of Sections 1 and 10 steps based on the thru-holes. - Move any UX connections on the rails v_wall(h=4, l=height-rail_clearance*2-thickness, th=thickness*1.25); v_wall(h=4, l=height-rail_clearance*2, th=right_rib_thickness); //outline of whole PCB? // cube([137.5, 97, 1], center=true); echo("Putting a hole with radius: ", hole_r , " at ", width_mm - h_margin; cv_in = [h_margin, row_1, 0]; triangle_out = [output_column, row_2, 0]; audio_in_2 = [left_col, row_3, 0]; manual_2 = [left_col, row_2, 0]; fm_lvl = [second_col, fourth_row, 0]; triangle_out = [third_col, fifth_row, 0]; pwm_duty = [input_column, row_2, 0]; audio_in_2 = [left_col, row_2, 0]; fm_lvl = [h_margin+working_width/8, row_2, 0]; audio_in_2 = [left_col, row_3, 0]; c_tune = [second_col, fifth_row, 0]; square_out = [third_col, fourth_row, 0]; triangle_out = [third_col, fifth_row, 0]; //right_rib_x = width_mm - thickness*2; slider_center = (width_mm - left_panel_width - right_panel_width)/2 + left_panel_width; slider_bottom = v_margin+8; module label(string, size=4, halign="center", font="Futura Md BT:style=Medium") { text(string, size, halign=halign, font=font); } BIN Panels/title_test.stl Normal file View File VCO_MANUAL_v2.pdf Executable file Unescape Hardware/PCB/precadsr/Kosmo_panel.pretty/Kosmo_Panel_Slotted_Mounting_Hole.kicad_mod Normal file Unescape Hardware/PCB/precadsr/Kosmo_panel.pretty/Kosmo_Panel_Dual_Mounting_Holes.kicad_mod Normal file View File Mon 10 May 2021 12:33:34 AM EDT