synth_tools

Back

20.32mm 2W length 15.5mm diameter 5mm Resistor, Axial_DIN0516 series, Axial, Horizontal, pin pitch=28mm, , length*diameter=21*8mm^2, Electrolytic Capacitor CP, Radial series, Radial, pin pitch=5.00mm, , length*width=7*2mm^2, Capacitor C Rect series Radial pin pitch 10.00mm single screw terminal block Metz Connect 360381, block size 9x7.3mm^2, drill diamater 1.3mm, pad diameter 2.5mm, hole diameter 1.3mm, length 11.0mm width 3.5mm Capacitor C, Radial series, Radial, pin pitch=37.50mm, , length*width=41.5*40mm^2, Capacitor, http://www.wima.com/EN/WIMA_MKS_4.pdf C Rect series Radial pin pitch 15.00mm length 16.5mm width 9.2mm Vishay TJ3 L_Toroid, Vertical series, Radial, pin pitch=10.00mm, diameter=25mm, height=45mm, Electrolytic Capacitor, , http://www.vishay.com/docs/28342/058059pll-si.pdf CP Radial series Radial pin pitch 5.00mm diameter 7.8mm Fastron 07HCP Inductor, Radial series, Radial, pin pitch=29.20mm, , diameter=28mm Inductor Radial series Radial pin pitch 2.54mm size 13.16x6.5mm^2 drill 1.1mm pad 2.2mm Terminal Block WAGO 804-309 45Degree pitch 10mm Varistor, diameter 12mm, width 6.2mm, pitch 7.5mm size 6.5x15mm^2 drill 1.2mm pad 2.4mm Terminal Block 4Ucon ItemNo. 20001, 4 pins, pitch 5mm, size 60x7.6mm^2, drill diamater 1.3mm, pad diameter 3mm, size source Multi-Contact FLEXI-2V 0.25 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator Soldered wire connection with double feed through strain relief, for a single 1.5 mm² wires, reinforced insulation, conductor diameter 1.7mm, outer diameter 2.1mm, size source Multi-Contact FLEXI-E 0.1 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator Hirose DF13C SMD, CL535-0408-9-51, 8 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator Soldered wire connection with feed through strain relief, for 6 times 0.127 mm² wires, reinforced insulation, conductor diameter 0.4mm, outer diameter 1.5mm, size source Multi-Contact FLEXI-E 2.5 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator Mounting Hardware, inside through hole M2, height 1, Wuerth electronics 9775026360 (https://katalog.we-online.com/em/datasheet/9775026360.pdf), generated with kicad-footprint-generator Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-106-02-xxx-DV-BE, 6 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator Molex Sabre top entry connector Molex Micro-Fit_3.0 vertical connector https://www.on-shore.com/wp-content/uploads/PJ012-8P8CX.pdf plug, ethernet, 8P8C, RJ45 Plug AJP92A8813 8P8C RJ45 ethernet connector with transformer and POE, https://abracon.com/Magnetics/lan/ARJP11A.PDF Shielded, LEDs, 4 Ports, https://cdn.amphenol-cs.com/media/wysiwyg/files/drawing/rjhse538x04.pdf RJ45 8p8c quad ethernet cat5 Shielded, 2 LEDs, https://www.haloelectronics.com/pdf/fastjack-100baset.pdf 10/100 Ethernet RJ45 Tab-Down Halo FastJack, Shielded, 2 LED, 2 Ports, http://www.amphenolinfocom.eu/NavData/Drawings/RJHSE-538X-02-REVC.pdf RJ45 8p8c ethernet POE 10/100/1000 Base-T Transformer Module, PT61020EL (https://www.bourns.com/pdfs/PT61020.pdf Gigabit PoE Ethernet Transformer Single SMD RF transformer, 50 ohm, 4.5 to 3000Mhz, https://www.minicircuits.com/pdfs/TC1-1-13M+.pdf WE-AGDT Auxiliary Gate Drive Transformer, 1:1, 8.6x6.7x2.5mm (https://productfinder.pulseeng.com/products/datasheets/P663.pdf SMT Gate Drive Transformer, 1:1:1, 8.6x6.7x3.6mm (https://productfinder.pulseeng.com/products/datasheets/P663.pdf SMT Gate.

New Pull Request

Labels Milestones