Labels Milestones
BackSetting". /* [Top Rounding (optional)] */ // Four hole threshold (HP h_margin = hole_dist_side + thickness; width_mm = 70.8; // 14HP×5.08mm = 71.12; ES for 14HP is 70.8 c_tune = [second_col, fourth_row, 0]; //Fifth row interface placement fm_in = [h_margin+working_width/8, row_2, 0]; audio_in_2 = [left_col, row_2, 0]; square_out = [output_column, row_2, 0]; fm_lvl = [h_margin+working_width/8, row_4, 0]; pwm_cv_lvl = [width_mm - h_margin - working_width/8, row_4, 0]; pwm_cv_lvl = [width_mm - h_margin - working_width/8, row_3, 0]; cv_in_2b = [right_col, row_6, 0]; audio_in_1 = [left_col, row_7, 0]; cv_in_1b = [right_col, row_5, 0]; cv_in_2a = [left_col, row_5, 0]; audio_out_1 = [right_col, row_5, 0]; audio_out_1 = [right_col, row_3, 0]; c_tune = [width_mm/2 - h_margin, top_row, 0]; left_rib_x = 0; // 0 if indicator faces notch, 180 if it can fit; losing the bodge area. Outs: Clock Out - 1K to TP5 Gate Out - 1K to TP5 - Gate out (could normal to TP10, optional) - Casc out 2x Toggle Switches, 2pin: all step switches (all go to same bus 2x Pushbutton switches, all 2pin: - all step switches (all go to same bus run/stop 2x Pushbutton switches, all 2pin: reset Pots, 3-pin: - Glide In - U1-13 (can get at from top when assembled Stop Switch - 10 ohms between U1-14 and U2-1 when off, more.
- Mounting holes distance 25mm 9-pin D-Sub connector horizontal.
- (end 179.85 120.54 (end 181.65 118.74 (end 183.74.