synth_tools

Back

96 Ball, 9x16 Layout, 0.8mm Pitch, https://www.st.com/resource/en/datasheet/stm32mp151a.pdf ST TFBGA-361, 12.0x12.0mm, 361 Ball, 23x23 Layout, 0.5mm Pitch, S-PVSON-N10, DRC, http://www.ti.com/lit/ds/symlink/tps61201.pdf 3x3mm Body, 0.5mm Pitch (http://www.allegromicro.com/~/media/Files/Datasheets/ACS711-Datasheet.ashx Allegro Microsystems 24-Lead Plastic QFN (4mm x 4mm); Pitch 0.5mm; EP 2.7x2.6mm; for InvenSense motion sensors; Mask removed below exposed pad; keepout area marked (Package see: https://store.invensense.com/datasheets/invensense/MPU-6050_DataSheet_V3%204.pdf; See also https://www.invensense.com/wp-content/uploads/2015/02/InvenSense-MEMS-Handling.pdf 24-Lead Plastic Shrink Small Outline (SO), see https://www.elpro.org/de/index.php?controller=attachment&id_attachment=339 SO, 4 Pin (https://www.onsemi.com/pub/Collateral/MDB8S-D.PDF#page=4), generated with kicad-footprint-generator Soldered wire connection, for 4 times 1.5 mm² wires, reinforced insulation, conductor diameter 0.9mm, outer diameter 3.6mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator JST XA series connector, 502382-0270 (http://www.molex.com/pdm_docs/sd/5023820270_sd.pdf), generated with kicad-footprint-generator ipc_gullwing_generator.py TSSOP, 32 Pin (JEDEC MS-013AC, https://www.analog.com/media/en/package-pcb-resources/package/233848rw_20.pdf), generated with kicad-footprint-generator Soldered wire connection with feed through strain relief, for 2 times 0.15 mm² wires, reinforced insulation, conductor diameter 1.25mm, outer diameter 3.5mm, size 11.5x8.3mm^2, drill diamater 1.15mm, pad diameter 3mm, see , script-generated with , script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_RND THT terminal block RND 205-00033, 12 pins, pitch 5mm, size 60x8.1mm^2, drill diamater 1.3mm, pad diameter 3mm, see , script-generated with , script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_MetzConnect THT terminal block RND 205-00065, 45Degree (cable under 45degree), 48 pins, pitch 10mm, size 85x10.3mm^2, drill diamater 1.4mm, pad diameter 2.6mm, see http://www.farnell.com/datasheets/100425.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_MetzConnect THT terminal block Metz Connect Type055_RT01504HDWU pitch 5mm Varistor, diameter 21.5mm, width 5.8mm, pitch 7.5mm size 32.3x14mm^2 drill 1.15mm pad 3mm Terminal Block WAGO 804-324, 45Degree (cable under 45degree), 4 pins, pitch 5.08mm, size 55.9x9.8mm^2, drill diamater 1.3mm, pad diameter 2.5mm, see http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00023_DB_EN.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_MetzConnect THT single screw terminal block RND 205-00028 pitch 10mm size 35x8.1mm^2 drill 1.3mm pad 2.5mm terminal block Metz Connect 360322, block size 5x5mm^2, drill diamater 1.2mm, pad diameter 2.6mm, see http://www.metz-connect.com/de/system/files/productfiles/Datenblatt_311751_RT027xxHBLC_OFF-022814U.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_WAGO THT Terminal Block 4Ucon ItemNo. 19964, 6 pins, pitch 5mm, size 27.3x14mm^2, drill diamater 1.2mm, pad diameter 2.5mm, see http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00023_DB_EN.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_RND THT terminal block RND 205-00069, 4 pins, pitch 5.08mm, size 45.7x11.2mm^2, drill diamater 1.2mm, pad diameter 3mm, see , script-generated with , script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_Phoenix THT Terminal Block Phoenix PT-1,5-11-3.5-H pitch 3.5mm size 10.5x6.5mm^2 drill 1.2mm pad 2.4mm Terminal Block Phoenix MKDS-1,5-8, 8 pins, pitch 5mm, size 60x7.6mm^2, drill diamater 1.2mm, pad diameter 2.2mm, see http://www.mouser.com/ds/2/324/ItemDetail_1725672-916605.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_RND THT terminal block RND 205-00015, 5 pins, pitch 10mm, size 65x10.3mm^2, drill diamater 1.3mm, pad.

New Pull Request

Labels Milestones