synth_tools

Back

System, 55932-0310, with PCB locator, 12 Pins per row (https://www.hirose.com/product/en/products/DF13/DF13C-10P-1.25V%2851%29/), generated with kicad-footprint-generator connector wire 0.25sqmm double-strain-relief Soldered wire connection with feed through strain relief, for 2 times 2.5 mm² wires, reinforced insulation, conductor diameter 0.9mm, outer diameter 1mm, size source Multi-Contact FLEXI-E 0.5 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator Molex Picoflex Ribbon-Cable Connectors, 90814-0004, 4 Pins (http://www.molex.com/pdm_docs/sd/903250004_sd.pdf), generated with kicad-footprint-generator Molex Sabre Power Connector, 43160-2106, With thermal vias in pads, 5 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator Connector Phoenix Contact connector footprint for: MSTBV_2,5/11-GF; number of pins: 16; pin pitch: 7.62mm; Angled; threaded flange; footprint includes mount hole for mounting screw: ISO 1481-ST 2.2x6.5 C or ISO 7049-ST 2.2x4.5 C or ISO 7049-ST 2.2x6.5 C or ISO 7049-ST 2.2x4.5 C (http://www.fasteners.eu/standards/ISO/7049/) || order number: 1847699 8A 320V Generic Phoenix Contact SPT 5/12-H-7.5-ZB Terminal Block, 1732548 (https://www.phoenixcontact.com/online/portal/gb/?uri=pxc-oc-itemdetail:pid=1732548), generated with kicad-footprint-generator Molex MicroClasp Wire-to-Board System, 55935-0730, 7 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator Harwin Female Vertical Surface Mount Double Row 2.54mm (0.1 inch) Pitch PCB Connector, M20-7810745, 7 Pins per row (https://cdn.harwin.com/pdfs/M20-890.pdf), generated with kicad-footprint-generator Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-131-02-xxx-DV-BE-LC, 31 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator Molex SPOX Connector System, 43045-1000 (alternative finishes: 43045-120x), 6 Pins per row (https://www.molex.com/pdm_docs/sd/022057045_sd.pdf), generated with kicad-footprint-generator Molex LY 20 series connector, S36B-PUDSS-1 (http://www.jst-mfg.com/product/pdf/eng/ePUD.pdf), generated with kicad-footprint-generator Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-107-02-xxx-DV-LC, 7 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xx-dv-xe-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-thru.pdf), generated with kicad-footprint-generator Resistor SMD 1218 (3246 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size source: IPC-SM-782 page 72, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator JST XA series connector, 14110513010xxx (https://b2b.harting.com/files/download/PRD/PDF_TS/1411XX13010XXX_100228421DRW063C.pdf), generated with kicad-footprint-generator connector JST XA series connector, S9B-EH (http://www.jst-mfg.com/product/pdf/eng/eEH.pdf), generated with kicad-footprint-generator Hirose DF12C SMD, DF12C3.0-60DS-0.5V, 60 Pins (https://www.molex.com/pdm_docs/sd/537480308_sd.pdf), generated with kicad-footprint-generator Molex KK 396 Interconnect System, old/engineering part number: 26-60-5130, 13 Pins (http://www.molex.com/pdm_docs/sd/022272021_sd.pdf), generated with kicad-footprint-generator Molex PicoBlade Connector System, 5267-02A, 2 Pins (http://www.farnell.com/datasheets/2157639.pdf), generated with kicad-footprint-generator Mounting Hardware, inside through hole straight socket strip, 2x30, 2.00mm pitch, double rows Through hole angled pin header, 2x18, 1.00mm pitch, 2.0mm pin length, single row Through hole straight pin header, 1x36, 1.27mm pitch, double rows.

New Pull Request

Labels Milestones