Labels Milestones
Back<- it's a simple implementation. Can be done, but requires a lot of wiring and increases risk of noise on power rails. Things best left to external modules: - CV-controlled CV offset module - add a voltage to another voltage. Useful here for pitching up from a designated place, then offering equivalent access to copy from a base. 6 sockets - One multi-pole rotary switch - 7mm, +4mm extra thunkicons - 8.9mm, +3.5mm, make sure to use 7.5mm holes, not 6mm alpha pots - 9.8mm, +2mm rotary - 11.5mm, +3.5mm -- biggest by far, maybe 12.6mm? SR2511 series are 11.43? Maybe more? Distance between pcb and front panel, horizontal PCB mount, asymmetric push, https://www.neutrik.com/en/product/nc3fah1-da A Series, 3 pole male XLR receptacle, grounding: mating connector shell and front panel, horizontal PCB mount, https://www.neutrik.com/en/product/nc5fah A Series, 3 pole male XLR receptacle, grounding: mating connector shell to pin1 and front panel, vertical PCB Cherry MX keyswitch ISO enter plate Matias/ALPS keyswitch, ISO Enter, http://matias.ca/switches/ Matias ALPS keyswitch 1.75u Matias/ALPS keyswitch, 2.25u, plate mount, http://cherryamericas.com/wp-content/uploads/2014/12/mx_cat.pdf Cherry MX keyswitch, 1.25u, PCB mount, https://www.neutrik.com/en/product/nc3faah1 AA Series, 3 pole male XLR receptacle, grounding: separate.
- 11.0A, Itrip=20.0A, http://www.bourns.com/docs/product-datasheets/mfrht.pdf PTC.
- A high enough voltage to another.