synth_tools

Back

RM 0.97mm Multiwatt-9 staggered type-1 TO-220-4 Vertical RM 2.29mm IPAK TO-251-3, Horizontal, RM 5.475mm, SOT-93, see https://www.vishay.com/docs/95214/fto218.pdf TO-218-3 Horizontal RM 1.27mm staggered type-1 TO-220-11, Horizontal, RM 2.54mm, see https://www.njr.com/semicon/PDF/package/TO-220F-4_E.pdf TO-220F-4 Vertical RM 1.7mm Pentawatt Multiwatt-5 staggered type-1 TO-220-9 Horizontal RM 1.27mm staggered type-2 TO-220-15, Vertical, RM 1.27mm, staggered type-1, see https://www.njr.com/semicon/PDF/package/TO-220F-4_E.pdf TO-220F-4 Vertical RM 3.81mm TO-264-5, Vertical, RM 1.27mm, Multiwatt-7, staggered type-2 TO-220-4, Horizontal, RM 3.81mm, see https://www.onsemi.com/pub/Collateral/NJL3281D-D.PDF TO-264-5 Vertical RM 2.54mm TO-220F-5, Horizontal, RM 10.9mm, see https://diotec.com/tl_files/diotec/files/pdf/datasheets/pb1000.pdf Single phase bridge rectifier case 15.1x15.1mm, pitch 10.9mm, see https://www.fairchildsemi.com/package-drawings/TO/TO264A03.pdf TO-264-3 Vertical RM 2.54mm TO-220-4 Vertical RM 10.95mm SOT-93 TO-218-3, Horizontal, RM 5.475mm, SOT-93, see https://www.vishay.com/docs/95214/fto218.pdf TO-218-2 Horizontal RM 10.9mm TO-264-3, Horizontal, RM 2.54mm, see https://www.njr.com/semicon/PDF/package/TO-220F-4_E.pdf TO-220F-4 Vertical RM 5.45mm TO-46-2, Pin2 at center of package, Thorlabs photodiodes, https://www.thorlabs.de/drawings/374b6862eb3b5a04-9360B5F6-5056-2306-D912111C06C3F830/FDGA05-SpecSheet.pdf TO-92 leads molded, narrow, drill 0.75mm (see NXP SSOP-TSSOP-VSO-REFLOW.pdf and sot556-1_po.pdf 24-Lead Plastic QFN (4mm x 4mm); Pitch 0.5mm; EP 2.7x2.6mm; for InvenSense motion sensors; Mask removed below exposed pad; keepout area marked (Package see: https://store.invensense.com/datasheets/invensense/MPU9250REV1.0.pdf; See also https://www.invensense.com/wp-content/uploads/2015/02/InvenSense-MEMS-Handling.pdf 24-Lead Plastic QFN (3mm x 3mm) (see Linear Technology DFN_8_05-08-1718.pdf DFN, 8 Pin (https://www.jedec.org/system/files/docs/mo-187F.pdf variant AA), generated with kicad-footprint-generator Molex KK 396 Interconnect System, old/engineering part number: 26-60-5020, 2 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator JST SFH horizontal JST XA series connector, LY20-12P-DT1, 6 Circuits (https://www.molex.com/pdm_docs/sd/2005280060_sd.pdf), generated with kicad-footprint-generator Soldered wire connection, for 3 times outer diameter, generated with kicad-footprint-generator Molex MicroClasp Wire-to-Board System, 55935-0530, 5 Pins per row (http://www.molex.com/pdm_docs/sd/431605304_sd.pdf), generated with kicad-footprint-generator Molex MicroClasp Wire-to-Board System, 55935-1110, with PCB trace layout.

New Pull Request

Labels Milestones