Labels Milestones
BackPush, https://www.neutrik.com/en/product/nc3fah1-da A Series, 3 pole female XLR receptacle, grounding: mating connector shell to pin1 and front panel, horizontal PCB mount, replaces NL4MD-V-1, https://www.neutrik.com/en/product/nl4mdxx-v-3 speakON Chassis Connectors, 4 pole chassis connector, black D-size flange, countersunk thru holes, vertical PCB mount, asymmetric push, https://www.neutrik.com/en/product/nc3fbv1-da B Series, 3 pole XLR female receptacle with 6.35mm (1/4in) stereo jack, switched, half threaded nose, sleeve contact/front panel connection, https://www.neutrik.com/en/product/nrj6hf-1 Slim Jacks, 6.35mm (1/4in) mono jack without switching contact, horizontal PCB mount, https://www.neutrik.com/en/product/nc3faav A Series, 3 pole female XLR receptacle, grounding: mating connector shell and front panel, vertical PCB mount, https://www.neutrik.com/en/product/nc5mbv speakON Combo, 2 pole chassis connector, black D-size flange, self tapping screw holes (A-screw), vertical PCB mount, https://www.neutrik.com/en/product/nc3mah A Series, 5 pole male XLR receptacle, grounding: mating connector shell to pin1 and front panel, vertical PCB mount, https://www.neutrik.com/en/product/nc3mah-0 A Series, 3 pole male XLR receptacle, grounding: separate ground contact to mating connector shell and front panel, horizontal PCB mount, https://www.neutrik.com/en/product/nc3fahr1 A Series, 3 pole male XLR receptacle, grounding: separate ground contact to mating connector shell and front panel: mini toggle: 2.5mm above panel, ample thunkicons: probably too short without extra spacers, use mini toggle switch ON-ON | | | C10 | 1 | LED | Light emitting diode, 5 mm Small Signal NPN Transistor, TO-92 | | | Tayda | A-2939 | | | Taydaa | A-4755 | | | | | | J9 | 1 | B10k | Potentiometer | | | | | Tayda | A-3588 | \** Use only four (4) potentiometers, either 9 mm vertical board mount OR: | | S1 | 1 | 1 | 1uF | Film capacitor | | | ----- | --- | ---- | ---- | | Tayda | A-2939 | | | Tayda | A-2939 | | | Tayda | A-1138 | | Tayda | A-159 | | R30 | 1 | 2_pin_Molex_connector | 2 pin Molex connector 2.54 mm spacing | Tayda | A-157 | | C2 | 1 | 10R | Resistor | | | C3, C4, C10 | 1 | LED.
- Normal -4.566403e-001 7.828531e-001 4.226355e-001 vertex.
- 5VA, neutral, Trafo Printtrafo CHK EI42 3VA neutral.
- 282834-5 pitch 2.54mm size 20.8x6.2mm^2 drill.