synth_tools

Back

Three position, dual pole double throw, separate symbols | | | J7 | 1 | 1 | LED | Light emitting diode | Tayda | A-1847 | | | | | C6, C7, C8, C9 Schottky Barrier Rectifier Diode, DO-41 | | R20, R22 | 3 | 2_pin_Molex_header | KK254 Molex connector 2.54 mm spacing 3 pin Molex connector 2.54 mm spacing | | | J3, J4, J5 | 3 | 4.7k | Resistor | | Tayda | A-1624 or A-2969 | | R30 | 1 | 4.7 uF | Polarized capacitor | | R31 | 1 | Synth_power_2x5 | 2x5 pin shrouded header 2.54 mm 2x5"/> Standard switching diode, DO-35 | | | Tayda | A-4349 | | | | L1 | 1 | B10k | **Potentiometer, 16 mm vertical board mount | | | | S3 | 1 | | J9 | 3 * https://www.digikey.com/en/products/detail/bourns-inc/PTL30-15R0-103B1/3781301 (red B10K) and https://www.digikey.com/en/products/detail/bourns-inc/PTL30-15O0-105A2/7314942 (orange A1M) The first two groups should be changed to IDC 2×6 connectors. If we expect or plan on developing modules which use the 4 pins RGB RGBLED LED, Round, Rectangular size 5.0x2.0mm^2 3 pins diameter 5.0mm 2 pins diameter 5.0mm z-position of LED center 2.0mm, 2 pins, diameter 3.0mm z-position of LED center 1.0mm 2 pins IR-ED, diameter 3.0mm, 2 pins, pitch 5mm, size 25x12.6mm^2, drill diamater 1.2mm, pad diameter 3mm.

New Pull Request

Labels Milestones