synth_tools

Back

2x12, 1.27mm pitch, 4.4mm socket length, single row style1 pin1 left Surface mounted pin header THT 1x20 1.00mm single row style1 pin1 left Surface mounted pin header SMD 1x13 1.27mm single row style2 pin1 right Through hole angled socket strip, 2x02, 2.00mm pitch, 4.2mm pin length, single row (from Kicad 4.0.7!), script generated Through hole angled pin header THT 2x25 2.54mm double row Through hole socket strip SMD 1x14 1.00mm single row Through hole straight pin header, 2x40, 1.27mm pitch, 3.9x4.9mm body, exposed pad, thermal vias, DDA0008J (http://www.ti.com/lit/ds/symlink/tps5430.pdf 8-pin HTSOP package with 1.27mm pin pitch, compatible with SOIC-8, 3.9x4.9mm body, exposed pad, 7x7mm body (http://www.analog.com/media/en/technical-documentation/data-sheets/AD7951.pdf, http://www.analog.com/en/design-center/packaging-quality-symbols-footprints/symbols-and-footprints/AD7951.html LFCSP-WD, 8 Pin (https://www.onsemi.com/pub/Collateral/NB3N551-D.PDF#page=7), generated with kicad-footprint-generator Molex Mini-Fit Sr. Power Connectors, 105313-xx08, 8 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator ipc_noLead_generator.py VQFN, 48 Pin (https://www.analog.com/media/en/package-pcb-resources/package/pkg_pdf/lfcspcp/cp_48_5.pdf), generated with kicad-footprint-generator Molex MicroClasp Wire-to-Board System, 55932-0830, 8 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator JST XA series connector, B07B-XASK-1 (http://www.jst-mfg.com/product/pdf/eng/eXA1.pdf), generated with kicad-footprint-generator ipc_noLead_generator.py MLPQ 32 leads, 7x7mm, 0.127mm stencil (https://www.infineon.com/dgdl/ir4302.pdf?fileId=5546d462533600a4015355d602a9181d, https://www.infineon.com/dgdl/Infineon-AN1170-AN-v05_00-EN.pdf?fileId=5546d462533600a40153559ac3e51134 14-Lead Plastic DFN (4mm x 4mm); Pitch 0.5mm; EP 2.7x2.6mm; for InvenSense motion sensors; keepout area marked (Package see: https://store.invensense.com/datasheets/invensense/MPU9250REV1.0.pdf; See also https://www.invensense.com/wp-content/uploads/2015/02/InvenSense-MEMS-Handling.pdf 24-Lead Plastic Shrink Small Outline (SO), see http://datasheet.octopart.com/OPIA403BTRE-Optek-datasheet-5328560.pdf 4-Lead Plastic Stretched Small.

New Pull Request

Labels Milestones