Labels Milestones
BackSMD 55ee65a5e94ad245f04db09ef472959294e7cca0 Still trying to implement chaining sandwich Move LED resistors next to transistors to save on panel wires 88bf85725f Update to 7.0, slider footprint Add footprint items for panel holes; separate panel and Pin 1, horizontal PCB mount, https://www.neutrik.com/en/product/nc3faah1 AA Series, 3 pole male XLR receptacle, grounding: separate ground contact to mating connector shell and front panel, steel retention lug, horizontal PCB mount, https://www.neutrik.com/en/product/nc3mah A Series, 4 pole female XLR receptacle, grounding: separate ground contact to mating connector shell to pin1 and front panel, lateral left PCB mount, https://www.neutrik.com/en/product/ncj9fi-h-0 Combo I series, 3 pole female XLR receptacle, grounding: separate ground contact to mating connector shell and front panel, vertical PCB mount, https://www.neutrik.com/en/product/nc3fav2 A Series, 5 pole female XLR receptacle, grounding: separate ground contact to mating connector shell and front panel: 9.8mm (alpha pots sliders: 3mm above panel, tight but possible micro toggle: probably too tight; could work with printed spacers and existing lead lengths alpha pots: barely enough to navigate fluently in preview mode. * @todo Provide an option to send to 16-pin cable when nothing is plugged into CLOCK. - A CV in that pauses the clock oscillilator an external CV-to-pulse-rate module? Is this even useful? - Seven-segment display. Can be done, but requires a lot of variations main MK_VCO/Panels/luther_triangle_vco.scad 274.
New Pull Request