synth_tools

Back

CB), generated with kicad-footprint-generator Molex MicroClasp Wire-to-Board System, 55935-0910, with PCB locator, 2 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator Wuerth WR-WTB series connector, B09B-ZESK-1D, with boss (http://www.jst-mfg.com/product/pdf/eng/eXH.pdf), generated with kicad-footprint-generator ipc_gullwing_generator.py TSSOP, 40 Pin (http://www.ti.com/lit/ds/symlink/drv8308.pdf#page=56 JEDEC MO-220 variant VEED-6), generated with kicad-footprint-generator Connector Phoenix Contact, SPT 5/6-H-7.5-ZB 1719231 Connector Phoenix Contact, SPT 2.5/3-V-5.0-EX 1732506 Connector Phoenix Contact, SPT 5/10-V-7.5-ZB Terminal Block, 1732580 (https://www.phoenixcontact.com/online/portal/gb/?uri=pxc-oc-itemdetail:pid=1732580), generated with kicad-footprint-generator ipc_noLead_generator.py LQFN, 16 Pin (https://www.st.com/resource/en/datasheet/stp08cp05.pdf#page=20), generated with kicad-footprint-generator ipc_noLead_generator.py TDFN, 8 Pin (https://www.jedec.org/sites/default/files/docs/MO-193D.pdf variant BA), generated with kicad-footprint-generator ipc_gullwing_generator.py SO, 16 Pin (https://pdfserv.maximintegrated.com/package_dwgs/21-0136.PDF (T1633-5), https://pdfserv.maximintegrated.com/land_patterns/90-0032.PDF), generated with kicad-footprint-generator Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-128-02-xxx-DV-BE-A, 28 Pins per row, Mounting: PCB Mounting Flange (http://www.molex.com/pdm_docs/sd/039291047_sd.pdf), generated with kicad-footprint-generator Molex SPOX Connector System, 53048-0610, 6 Pins (http://www.farnell.com/datasheets/2157639.pdf), generated with kicad-footprint-generator ipc_gullwing_generator.py TSSOP28: plastic thin shrink small outline 7,5mm long https://toshiba.semicon-storage.com/info/docget.jsp?did=53548&prodName=TLP2770 6-Lead Plastic DFN (3mm x 3mm); Pitch 0.4mm; EP 1.7x1.54mm; for InvenSense motion sensors; Mask removed below exposed pad; keepout area marked (Package see: https://store.invensense.com/datasheets/invensense/MPU9250REV1.0.pdf; See also https://www.invensense.com/wp-content/uploads/2015/02/InvenSense-MEMS-Handling.pdf 24-Lead Plastic QFN (3mm x 3mm); Pitch 0.4mm; EP 1.7x1.54mm; for InvenSense motion sensors; Mask removed below.

New Pull Request

Labels Milestones