synth_tools

Back

+ 12; row_2 = row_1 + vertical_space/7; cv_in_1a = [left_col, row_5, 0]; audio_out_1 = [right_col, row_5, 0]; audio_out_1 = [right_col, row_5, 0]; audio_out_1 = [right_col, row_6, 0]; audio_in_1 = [left_col, row_3, 0]; pwm_duty = [input_column, bottom_row, 0]; pwm_pot = [input_column + h_margin/2, bottom_row, 0]; pwm_pot = [input_column - h_margin/2, row_1, 0]; triangle_out = [third_col, fifth_row, 0]; pwm_duty = [second_col, third_row, 0]; fm_lvl = [second_col, third_row, 0]; fm_lvl = [h_margin+working_width/8, row_3, 0]; manual_2 = [left_col, row_6, 0]; audio_in_1 = [left_col, row_5, 0]; audio_out_1 = [right_col, row_1, 0]; fm_pot = [input_column + h_margin/2, row_1, 0]; square_out = [output_column, row_1, 0]; triangle_out = [width_mm-h_margin-working_width/4, row_1, 0]; square_out = [output_column, row_2, 0]; audio_in_2 = [left_col, row_1, 0]; pwm_in = [input_column + h_margin/2, row_1, 0]; audio_out_2 = [right_col, row_6, 0]; cv_1b_atten = [right_col, row_3, 0]; c_tune = [second_col, second_row, 0]; //Third row interface placement sync_in = [first_col, fifth_row, 0]; pwm_duty = [width_mm - h_margin - working_width/8, row_4, 0]; left_rib_x = thickness * 1.2; right_rib_x = width_mm - col_right - thickness; left_panel_width = 16.5+16.5+10.5; //two knob, one jack, plus space for everything, lining things up more Make slider and LED footprints match current OpenSCAD model Make slider and LED footprints match current OpenSCAD model Make slider and LED footprints match current OpenSCAD model .gitignore | 1 | 2_pin_Molex_connector | 2 | 10uF | Electrolytic capacitor | | | | | | | C6, C7, C8, C9 D1, D2, D3, D4, D5, D6, D7, D8, D9, D10 Standard switching diode, DO-35 | | | J8 | 1 uF | Unpolarized capacitor | | | | | | | | | Tayda | A-4349 | | | | R21, R22, R23 | 3 pin Molex header 2.54 mm spacing | Tayda | A-3588 | | | Tayda | A-4349 | | | | | | | | | R21, R22, R23 | 3 pin Molex header 2.54 mm spacing Pin header 2.54.

New Pull Request

Labels Milestones