Labels Milestones
Back- glide in (sleeve and normal both GND Glide attenuator (B10k) (join two left pins from below Pots, 2-pin: - Glide, manual (A100k) (two left pins, from below - Clock In Normal - 1k to U2-8 (AND NOT short to U2-10 - Clock rate (B100k) (not sure yet which 2 pins LED diameter 4.0mm Plated Hole as test Point, square 1.5mm side length SMD rectangular pad as test Point, square 4.0mm side length, hole diameter 1.0mm wire loop as test point, pitch 6.35mm, size 12.7x12.5mm^2, drill diamater 1.1mm, pad diameter 2.5mm, see http://www.metz-connect.com/de/system/files/productfiles/Datenblatt_311711_RT137xxHBWC_OFF-022811Q.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_WAGO THT Terminal Block WAGO 236-112 45Degree pitch 7.5mm size 51.5x15mm^2 drill 1.2mm pad 2mm PhoenixContact PTSM0,5 3 2,5mm vertical SMD spring clamp terminal block connector http://www.phoenixcontact.com/us/products/1778719/pdf PhoenixContact PTSM0,5 6 HV 2,5mm vertical SMD spring clamp terminal block RND 205-00079, vertical (cable from top), 3 pins, pitch 2.54mm, size 25.9x6.2mm^2, drill diamater 1.3mm, pad diameter 3mm, size source Multi-Contact FLEXI-E 0.15 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator JST SH series connector, S10B-PH-SM4-TB (http://www.jst-mfg.com/product/pdf/eng/ePH.pdf), generated with kicad-footprint-generator connector Molex Mega-Fit top entry.
- 106084 bytes Panels/luther_triangle_10hp.stl | Bin 0 -> 171113.
- MarkingWidth = 1.5*1; MarkingWidth.
- Hardware/Panel/precadsr-panel/precadsr-panel.kicad_pcb create mode 100644 Hardware/PCB/precadsr/Kosmo_panel.pretty/Kosmo_Pot_Hole.kicad_mod create mode.
- 29 Pins per row.