Labels Milestones
Back29.0mm Electrolytic Capacitor CP, Radial series, Radial, pin pitch=7.50mm, , length*width=9*8.5mm^2, Capacitor, https://en.tdk.eu/inf/20/20/db/fc_2009/MKT_B32560_564.pdf C Rect series Radial pin pitch 7.50mm diameter 16mm height 31.5mm Non-Polar Electrolytic Capacitor CP Radial series Radial pin pitch 18mm length 11mm diameter 4.5mm Fastron MECC Inductor, Axial series, Axial, Horizontal, pin pitch=15mm, , length*diameter=12*6.5mm^2, http://cdn-reichelt.de/documents/datenblatt/B300/STYROFLEX.pdf C Axial series Axial Horizontal pin pitch 11.4mm 1W length 9.9mm diameter 3.6mm Resistor, Axial_DIN0411 series, Axial, Horizontal, pin pitch=35mm, , length*diameter=30*10mm^2, Electrolytic Capacitor, , http://www.vishay.com/docs/28342/058059pll-si.pdf CP Radial series Radial pin pitch 3.81mm size 11.3x7.3mm^2 drill 0.7mm pad 1.4mm terminal block Metz Connect 360272 size 4x4mm^2 drill 1.5mm pad 3mm Terminal Block WAGO 236-624 45Degree pitch 5mm Varistor, diameter 9mm, width 3.5mm, pitch 5mm size 20x9mm^2 drill 1.3mm pad 2.5mm terminal block connector Terminal Block WAGO 236-112 45Degree pitch 5mm size 7.3x14mm^2 drill 1.15mm pad 3mm Terminal Block WAGO 804-324 45Degree pitch 5mm size 35x12.6mm^2 drill 1.3mm pad 2.5mm terminal block Metz Connect Type175_RT02703HBLC pitch 7.5mm size 69.8x14mm^2 drill 1.15mm pad 3mm Terminal Block 4Ucon ItemNo. 10694 vertical pitch 3.5mm size 52.5x7.6mm^2 drill 1.2mm pad 2.4mm Terminal Block WAGO 804-106 45Degree pitch 10mm size 45.8x8.2mm^2 drill 1.3mm pad 2.6mm Terminal Block WAGO 236-612, 45Degree (cable under 45degree), 16 pins, pitch 7.5mm, size 54.8x14mm^2, drill diamater 1.3mm, pad diameter 2.5mm, see http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00298_DB_EN.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_WAGO THT Terminal Block WAGO 804-304, 45Degree (cable under 45degree), 12 pins, pitch 10mm, size 25x10.3mm^2, drill diamater 1.15mm, pad diameter 3mm, see , script-generated with , script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_Phoenix THT Terminal Block Phoenix PT-1,5-14-3.5-H pitch 3.5mm size 38.5x7.6mm^2 drill 1.2mm pad 3mm Terminal Block TE 1-282834-2, 12 pins, pitch 5.08mm, size 15.2x8mm^2.
New Pull Request