Labels Milestones
BackIn schmidt inverter mode, maybe both 7808 and hex inverter trigger are unnecessary? Alternative: Midi -> CV We could also do all-different colors, but unfortunately Mouser only has A1Ms in orange. Replacing LEDs in many places might be fine, might introduce intermittents - Don't put R8 so close to R26 -- D36/R47 too close From 812d609d12a788e600a582b2b6e7494f6d2b0728 Mon Sep 17 00:00:00 2001 Subject: [PATCH] Updates from real TL0x4s re-re-remove the mysterious extra trace Add notes about wiring SW15 cross-board Add design rules for jlcpcb Latest commits for file Schematics/SynthMages.pretty/Jack_3.5mm_QingPu_WQP-PJ398SM_Vertical_CircularHoles_Socket_Centered.kicad_mod Binary files /dev/null and b/Docs/precadsr.pdf differ Binary files /dev/null and b/Hardware/Panel/precadsr-panel-Gerbers/precadsr-panel-drl_map.pdf differ eea453f1ee Go to file db7d02719b Find and replace last few thin traces, fix teardrops and gnd fill Find and replace last few thin traces, fix teardrops and gnd fill db7d02719b68f4d2f81a25d8b6527257f18cc3a1 Embiggen traces, add teardrops Embiggen traces, add teardrops updated C5 footprint & tracing; schematic annotation Add 55k-ish resistor to coarse knob to fix tuning range pushed tag v1.0 to synth_mages/MK_SEQ released Prototype.
- Ipc_gullwing_generator.py MQFP, 44 Pin (http://www.ti.com/lit/ds/symlink/tpa3251.pdf#page=38.
- Vertex -8.27705 0 19.9688 vertex 5.9343.
- Tied is a corner edge.
- Ipc_gullwing_generator.py TSOP I, 32 pins, through hole, DF13-03P-1.25DSA.
- Size 11.5x8.3mm^2, drill diamater.