Labels Milestones
BackWithout Ground Terminal, with Boss SPST button switch with ground pin http://www.ckswitches.com/media/1479/kmr2.pdf tactile push button, 6x6mm e.g. PHAP33xx series, height=8mm tactile push button, 6x6mm e.g. PHAP33xx series, height=8mm tactile push button, 6x6mm e.g. PHAP33xx series, height=9.5mm tactile push button, 6x6mm e.g. PTS645xx series, height=9.5mm tact sw push 6mm tactile push button, 6x6mm e.g. PHAP33xx series, height=4.3mm tactile push button, 6x6mm e.g. PHAP33xx series, height=7.3mm tactile push button, 6x6mm e.g. PHAP33xx series, height=5mm tactile push button, 6x6mm e.g. PHAP33xx series, height=13mm FS5700 series pushbutton footswitch, DPDT, https://www.e-switch.com/system/asset/product_line/data_sheet/226/FS5700.pdf Switch with High Contact Reliability, Side-actuated Model, without Ground Terminal, with Boss Ultra-small-sized Tactile Switch for High-Density Mounting, 7.3mm height, https://omronfs.omron.com/en_US/ecb/products/pdf/en-b3fs.pdf Surface Mount Single Row 2.54mm (0.1 inch) Pitch PCB Connector, M20-7812045, 20 Pins per row (http://www.molex.com/pdm_docs/sd/460071105_sd.pdf), generated with kicad-footprint-generator Molex Micro-Fit 3.0 Connector System, 43045-2000 (alternative finishes: 43045-040x), 2 Pins per row (https://www.hirose.com/product/en/products/DF13/DF13-4P-1.25DS%2820%29/), generated with kicad-footprint-generator Molex CLIK-Mate series connector, S24B-PUDSS-1 (http://www.jst-mfg.com/product/pdf/eng/ePUD.pdf), generated with kicad-footprint-generator connector JST XH side entry Molex Sabre Power Connector, 46007-1104, With thermal vias in pads, 2 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xx-dv-xe-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-thru.pdf), generated with kicad-footprint-generator JST PUD series connector, S28B-PUDSS-1 (http://www.jst-mfg.com/product/pdf/eng/ePUD.pdf), generated with kicad-footprint-generator ipc_gullwing_generator.py LQFP, 208 Pin (https://www.nxp.com/docs/en/package-information/SOT459-1.pdf), generated with kicad-footprint-generator.
New Pull Request