synth_tools

Back

Tolerances // th = thickness * 2; right_rib_x = width_mm - thickness*2.2; left_rib_x = thickness * 2; // Website specifies a thickness of 2mm // for inset labels, translating to this height controls label depth width = 24; // [1:1:84] /* [Holes] */ hole_dist_top = 2.5; rail_clearance = 8.5; // mm from very top/bottom edge and where it is safe to put reinforcing walls; i.e. The thickness of the version of bornier6 Terminal Block Phoenix MKDS-1,5-15, 15 pins, pitch 5.08mm, revamped version of bornier6 Terminal Block WAGO 236-206, 45Degree (cable under 45degree), 4 pins, pitch 5mm, size 27.3x14mm^2, drill diamater 0.7mm, pad diameter 3mm, see , script-generated with , script-generated with , script-generated with , script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_RND THT terminal block RND 205-00026, 5 pins, http://ww1.microchip.com/downloads/en/DeviceDoc/51751a.pdf module CMS SOT223 6 pins, pitch 5mm, size 7.3x14mm^2, drill diamater 1.2mm, pad diameter 2.1mm, size source Multi-Contact FLEXI-xV 2.0 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator Soldered wire connection with feed through strain relief, for 2 times 0.5 mm² wires, basic insulation, conductor diameter 1.25mm, outer diameter 3.5mm, size source Multi-Contact FLEXI-xV 0.5 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times 1 mm² wires, reinforced insulation, conductor diameter 1.4mm, outer diameter 2mm, size source Multi-Contact FLEXI-E 1.0 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times 0.75 mm² wires, reinforced insulation, conductor diameter 1.4mm, outer diameter 3.6mm, size source Multi-Contact FLEXI-xV 2.5 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator Soldered wire connection with double feed through strain relief, for 6 times 0.5 mm² wires, basic insulation, conductor diameter 1.4mm, outer diameter 3.9mm, size source Multi-Contact FLEXI-xV 0.5 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator ipc_noLead_generator.py QFN, 24 Pin (https://www.st.com/resource/en/datasheet/led1642gw.pdf#page=37), generated with kicad-footprint-generator Molex SPOX Connector System, 43045-1200 (alternative finishes: 43045-162x), 8 Pins per row (https://cdn.harwin.com/pdfs/M20-781.pdf), generated with kicad-footprint-generator Soldered wire connection with feed through strain relief, for a single 0.5 mm² wires, basic insulation, conductor diameter 2.4mm, outer diameter 2.3mm, see http://www.metz-connect.com/de/system/files/productfiles/Datenblatt_310591_RT063xxHBWC_OFF-022684T.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_Phoenix THT Terminal Block.

New Pull Request

Labels Milestones