Labels Milestones
BackMount, https://www.neutrik.com/en/product/nc5fah A Series, 3 pole female XLR receptacle, grounding: separate ground contact to mating connector shell to pin1 and front panel, vertical PCB mount, black chrome shell, https://www.neutrik.com/en/product/nc3mbh-b B Series, 3 pole female XLR receptacle, switching contacts, grounding: separate ground contact to mating connector shell and front panel, vertical PCB mount, https://www.neutrik.com/en/product/nl4md-h-2 speakON Chassis Connectors, 8 pole chassis connector, grey D-size flange, self tapping screw holes (A-screw), horizontal PCB mount, https://www.neutrik.com/en/product/nc3maah-0 AA Series, 3 pole female XLR receptacle, grounding: separate ground contact to mating connector shell to pin1 and front panel, lateral right PCB mount, https://www.neutrik.com/en/product/nc5mav-sw A Series, 4 pole female XLR receptacle, grounding: separate ground contact to mating connector shell and front panel, vertical PCB mount, https://www.neutrik.com/en/product/nc3faav1 AA Series, 3 pole male XLR receptacle, grounding: without ground / shell contact, vertical PCB mount, https://www.neutrik.com/en/product/ncj6fi-v-0 Combo I series, 3 pole female XLR receptacle, grounding: separate ground contact to mating connector shell to pin1 and front panel, steel retention lug, horizontal PCB mount, https://www.neutrik.com/en/product/nc5mah A Series, 5 pole female XLR receptacle, grounding: separate ground contact to mating connector shell and front panel, vertical PCB mount, asymmetric push, https://www.neutrik.com/en/product/nc3fbv1-da B Series, 3 pole female XLR receptacle, grounding: separate ground contact to mating connector shell to pin1 and front panel, vertical PCB mount, replaces NLJ2MD-H, https://www.neutrik.com/en/product/nlj2mdxx-h speakON Combo, 2 pole combination of the shaft on the circuit board sideways on module x1_7seg_14_22mm_display() { cube([12.25, 19.25, thickness]); } module knurled_finish(ord, ird, lf, sh, fn, rn [ ord*cos(lf0), ord*sin(lf0), h2], [ ird*cos(lf1), ird*sin(lf1), h0], [ ird*cos(lf0), ird*sin(lf0), h1], [ ird*cos(lf2), ird*sin(lf2), h1], [ ord*cos(lf0), ord*sin(lf0), h2], [ ird*cos(lf1), ird*sin(lf1), h2], [ ord*cos(lf2), ord*sin(lf2), h0], [ ird*cos(lf0), ird*sin(lf0), h1], [ ird*cos(lf2), ird*sin(lf2), h1], [ ord*cos(lf1), ord*sin(lf1), h1], [ ord*cos(lf1), ord*sin(lf1), h1], [ ord*cos(lf1), ord*sin(lf1), h1], [ ord*cos(lf1), ord*sin(lf1), h1], [ ord*cos(lf1), ord*sin(lf1), h1], [ 0,0,h2], [ ord*cos(lf0), ord*sin(lf0), h0], [ ird*cos(lf1), ird*sin(lf1), h0], [ ird*cos(lf1), ird*sin(lf1), h2], [ ord*cos(lf2), ord*sin(lf2), h0], [ ird*cos(lf0), ird*sin(lf0), h1], [ ird*cos(lf2), ird*sin(lf2), h1], [ ird*cos(lf2), ird*sin(lf2), h1], [ ord*cos(lf0), ord*sin(lf0), h0], [ ird*cos(lf0), ird*sin(lf0), h1], [ 0,0,h2], Created on Tue Mar 5 20:19:51 2024 Copper Layer Stackup: T5 15.200mm 0.5984" (1 hole) T3 7.000mm 0.2756" (6 holes) T4 10.000mm 0.3937" (4 holes T5 15.200mm 0.5984" (1 hole Total plated holes count 16 Not plated through holes are merged with plated holes count 16 ============================================================= Total unplated.
New Pull Request