Labels Milestones
Back208 Pin (https://www.nxp.com/docs/en/package-information/SOT459-1.pdf), generated with kicad-footprint-generator Molex Picoflex Ribbon-Cable Connectors, 90325-0020, 20 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator JST ZE series connector, B7PS-VH (http://www.jst-mfg.com/product/pdf/eng/eVH.pdf), generated with kicad-footprint-generator Molex MicroClasp Wire-to-Board System, 55935-1230, 12 Pins (http://www.molex.com/pdm_docs/sd/908140004_sd.pdf), generated with kicad-footprint-generator Hirose DF63 through hole, DF63M-4P-3.96DSA, 4 Pins per row (http://www.te.com/commerce/DocumentDelivery/DDEController?Action=srchrtrv&DocNm=82181_SOFTSHELL_HIGH_DENSITY&DocType=CS&DocLang=EN), generated with kicad-footprint-generator Molex CLIK-Mate series connector, 53261-1371 (http://www.molex.com/pdm_docs/sd/532610271_sd.pdf), generated with kicad-footprint-generator Soldered wire connection with feed through strain relief, for 5 times 2 mm² wires, reinforced insulation, conductor diameter 2.4mm, see http://www.4uconnector.com/online/object/4udrawing/10687.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_WAGO THT Terminal Block WAGO 236-208 45Degree pitch 5mm size 42.3x14mm^2 drill 1.15mm pad 3mm Terminal Block Phoenix MKDS-1,5-13 pitch 5mm size 56.5x15mm^2 drill 1.2mm pad 3mm Terminal Block WAGO 804-308, 45Degree (cable under 45degree), 3 pins, pitch 7.5mm, size 29x15mm^2, drill diamater 1.3mm, pad diameter 2.1mm, see http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00232_DB_EN.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_Phoenix THT Terminal Block Phoenix PT-1,5-2-3.5-H pitch 3.5mm size 39.5x8.3mm^2 drill 1.3mm pad 2.5mm terminal block RND 205-00071 pitch 7.5mm size 60x10.3mm^2 drill 1.3mm pad 2.5mm Terminal Block WAGO 236-624, 45Degree (cable under 45degree), 4 pins, pitch 5mm, size 25x8.3mm^2, drill diamater 1.1mm, pad diameter 2.5mm, see http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00067_DB_EN.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_RND THT terminal block Metz Connect Type175_RT02704HBLC, 4 pins, pitch 5mm, size 25x12.6mm^2, drill diamater 1.3mm, pad diameter 2.6mm, see http://www.farnell.com/datasheets/100425.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_RND THT terminal block Metz Connect Type171_RT13702HBWC pitch 7.5mm size 52.5x10.3mm^2 drill 1.3mm pad 2.5mm terminal block RND 205-00067 pitch 7.5mm Varistor, diameter 9mm, width 3.5mm, pitch 5mm size 10x12.6mm^2 drill 1.3mm pad 2.6mm terminal block RND 205-00082, 6 pins, http://www.ti.com/lit/ds/symlink/tps737.pdf module CMS SOT223 4 pins for trigger, gate, and CV routing updates to rev 2 beta f12031bb41 updates to rev 2 's notes on repique/caixa, two or three for surdos