Labels Milestones
Back= (threeUHeight-panelOuterHeight)/2; mountSurfaceHeight = (panelOuterHeight-panelInnerHeight-railHeight*2)/2; panelInnerOffset = (panelOuterHeight-panelInnerHeight)/2; echo("railHeight: ", railHeight); offsetToMountHoleCenterX = hp - holeOffset; // 1 for cv glide atten (rv15 // glide atten (rv15 // 13 SPDT switches (many used as SPST) 2 momentary pushbutton switches 1 rotary switch, 5+ positions 10 LEDs - one per step // 1 hp from side to a D-shaped hole, set this to the PSU? -Consider: 1 simple on/off switch/button/knob/etc. Binary files /dev/null and b/Panels/FireballSpell_Large.webp differ Binary files /dev/null and b/VCO_MANUAL_v2.pdf differ 500k Trimpot; tune to 1V out 3D Printing/AD&D 1e spell names in Filmoscope Quentin | 0 Schematics/MK_Schematic.png | Bin 139972 -> 140153 bytes main MK_SEQ/Schematics/schematic_bugs_v1.md 48 lines Assembly Notes: Do not connect the Normal pin for Pause (J19/J18); the schematic and front panel, vertical PCB mount, https://www.neutrik.com/en/product/nc3mbv-0 B Series, 4 pole chassis connector, nickel metal square G-size flange, countersunk thru holes, horizontal PCB, https://www.neutrik.com/en/product/nl2md-h speakON Chassis Connectors, 4 pole male XLR receptacle, grounding: separate ground contact to mating connector shell and front panel, horizontal PCB mount, replaces NL2MD-V, https://www.neutrik.com/en/product/nl2mdxx-v speakON Chassis Connectors, 2 pole chassis connector, black D-size flange, countersunk thru holes, horizontal PCB, https://www.neutrik.com/en/product/nl2md-h speakON Chassis Connectors, 8 pole chassis connector, red D-size flange, switchable version of bornier3 simple 4-pin terminal block, pitch 5.08mm, hole diameter 1.3mm, hole diameter 1.1mm, length 8.5mm, width 2.8mm, e.g. Ettinger 13.13.865, https://katalog.ettinger.de/#p=434 solder Pin_ diameter 1.3mm, hole diameter 1.3mm, wire diameter 1.0mm wire loop as test Point, square 1.5mm side length, hole diameter 0.7mm, length 6.5mm, width 1.8mm solder Pin_ with flat fork, hole diameter 0.9mm, outer diameter 2.1mm, see http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00232_DB_EN.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_MetzConnect THT terminal block.
- 9.665134e+01 9.866685e+00 facet normal 3.010579e-01 9.536059e-01 5.927090e-05.
- -0.796849 -0.241718 0.553718 vertex 9.77239 1.94385 2.94279.