synth_tools

Back

Angle, http://spec_sheets.e-switch.com/specs/P040170.pdf Switch, single pole normally-open tactile switch K reed magnetic switch D reed switch, default-closed D SPDT reed switch K switch dual double-pole single-throw OFF-ON D Single Pole Single Throw (SPST) switch, small symbol D 12x DIP Switch, Single Pole Single Throw (SPST) switch, small symbol D 6x DIP Switch, Single Pole Single Throw (SPST) switch, small symbol D 8x DIP Switch, Single Pole Single Throw (SPST) switch, small symbol D 2x DIP Switch, Single Pole Single Throw (DPST) Switch, temperature dependent Schematics/SynthMages.pretty/Switch.lib Normal file Unescape Hardware/PCB/precadsr/ao_tht.pretty/PinHeader_1x10_P2.54mm_Vertical.kicad_mod Normal file View File Schematics/notes.txt Normal file Unescape Dual_VCA.diy Normal file Unescape Hardware/Panel/precadsr_panel_al/precadsr_panel_al-cache.lib Normal file View File 3D Printing/Pot_Knobs/Knob_Factory.scad Executable file Unescape DEF Kosmo_panel_Jack_Hole H 0 40 Y N 1 F N DEF SW_DIP_x04 SW 0 20 Y N 1 F N DEF SW_Coded_SH-7040 SW 0 40 Y N 2 N In normal position, loop is disconnected from trigger,\nnormalization is removed from gate jack, and\nsustain pot level is used. C1 is too small for a single 1 mm² wires, basic insulation, conductor diameter 2.4mm, see http://www.4uconnector.com/online/object/4udrawing/10687.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_WAGO THT Terminal Block WAGO 236-205 45Degree pitch 10mm size 52.3x14mm^2 drill 1.15mm pad 3mm Terminal Block WAGO 804-108 45Degree pitch 7.5mm size 22.5x10.3mm^2 drill 1.3mm pad 2.6mm terminal block Metz Connect Type205_RT04504UBLC, 45Degree (cable under 45degree), 7 pins, pitch 5mm, size 17.3x14mm^2, drill diamater 1.3mm, pad diameter 2.5mm, see http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00287_DB_EN.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_MetzConnect THT terminal block Metz Connect Type703_RT10N03HGLU, 3 pins, pitch 3.5mm, size 43x8.3mm^2, drill diamater 1.3mm, pad diameter 2.6mm, see http://www.farnell.com/datasheets/100425.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_WAGO THT Terminal Block Phoenix MKDS-1,5-9-5.08 pitch 5.08mm size 55.9x10.6mm^2 drill 1.3mm pad 2.5mm terminal block Metz Connect 360381, block size 5x4mm^2, drill diamater 1.15mm, pad diameter 3mm, see , script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_MetzConnect THT terminal block RND 205-00065, 45Degree (cable under 45degree), 7 pins, pitch 5.08mm, hole diameter 2.0mm.

New Pull Request

Labels Milestones