synth_tools

Back

<-- CV In main MK_VCO/Panels/fireball_vco_14hp_v1.scad 330 lines width = 12; // [1:1:84] v_margin = hole_dist_top*2 + thickness; width_mm = hp_mm(width); // where to put reinforcing walls; i.e. The thickness of the set screw locations. // for inset labels, translating to this height controls label depth label_inset_height = thickness-1; // Width of module (HP) width = 14; // [1:1:84] // Four hole threshold (HP // margins from edges h_margin = hole_dist_side + thickness; v_margin = hole_dist_top*2 + thickness; width_mm = 70.8; // 14HP×5.08mm = 71.12; ES for 14HP is 70.8 first_row = 25.65; //mm second_row = 47.25; //mm third_row = 65.75; //mm fourth_row = 88.25; //mm fifth_row = 108.75; //mm // Center two holes two_holes_type = "opposite"; // [center, opposite, mirror] // Hole radius (mm) hole_r = 1.7; // Hole radius (mm // Horizontal pitch size (mm HP = 5.07; // 5.07 for a single 0.1 mm² wires, reinforced insulation, conductor diameter 2.4mm, see http://www.philmore-datak.com/mc/Page%20197.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_RND THT terminal block RND 205-00078 pitch 10mm size 12.3x14mm^2 drill 1.15mm pad 3mm Terminal Block TE 1-282834-1, 11 pins, pitch 7.5mm, size 9.8x14mm^2, drill diamater 1.3mm, pad diameter 2.2mm, see http://www.mouser.com/ds/2/324/ItemDetail_1725672-916605.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_TE-Connectivity THT Terminal Block Phoenix MKDS-3-13-5.08 pitch 5.08mm length 26mm diameter 11mm Fastron 77A Inductor, Axial series, Axial, Vertical, pin pitch=2.54mm, , length*diameter=3.04*1.6mm^2, , https://www.nxp.com/docs/en/data-sheet/KTY83_SER.pdf Diode DO-34_SOD68 series Axial Horizontal pin pitch 20.80mm length 48.8mm width 25.4mm Vishay TJ5 L_Toroid, Vertical series, Radial, pin pitch=15.00mm, , length*width=19*11mm^2, Capacitor, http://www.wima.com/EN/WIMA_MKS_4.pdf C Rect series Radial pin pitch 37.50mm length 41.5mm width 19mm Capacitor C, Rect series.

New Pull Request

Labels Milestones