Labels Milestones
Back[PATCH] schematic start, and some example modules Latest commits for file Schematics/circuit.pdf main synth_tools/RadioShaek2Board.diy 5515 lines 2bd01a1ff2 Add schematic, start on PCB with exploratory 8hp layout 2x Sockets, all three pins need wires: - clk in - glide in (sleeve and normal both GND Glide attenuator (B10k) (join two left pins from below) Pots, 2-pin: - Glide, manual (A100k) (two left pins, from below Pots, 2-pin: - Glide, manual (A100k) (two left pins, from below) Pots, 2-pin: - Glide, manual (A100k) (two left pins, from below Clock POT is too small; need more than 100k to get below 200bpm~ 3D Printing/6u_wing_v1.scad rename to 3D Printing/Cases/6u_wing_v1.scad Binary files a/Hardware/Panel/precadsr_panel.png and /dev/null differ From 52b504dd7cabbf7261c98563d42b1772d3bf6825 Mon Sep 17 00:00:00 2001 Subject: [PATCH] tweaks layout with input from sam format (units 3) (units_format 1) (precision 4)) From 972d8b1e0797912e848110b19e1af10ed411bbbb Mon Sep 17 00:00:00 2001 Subject: [PATCH] Add circuit blocks to kick drum schematic Add pulldown resistors for reset debounce cap; formatting PSU/Synth Mages Power Word Stun.kicad_pro Add scad for v3.2 From 5aaea69ed6fde3a14d8431b95cdb61f2e99d3f78 Mon Sep 17 00:00:00 2001 Subject: [PATCH] Make slider and LED footprints match current OpenSCAD model Checkpoint after re-centering sliders, before removing redundant LED resistors next to a Work for the sake of code complexity. Odd values are -=1 difference() { difference() { // slider pot slit // make a hole with radius: ", hole_r , " at ", width_mm - h_margin; left_rib_x = hole_dist_side + thickness.
- -4.942513e-001 -8.649397e-001 8.714973e-002 facet normal -0.0822333 -0.0819177 -0.993241.
- SO SOIC Pitch 1.27 SSOP-8 2.9 x2.8mm.
- Strip, HLE-112-02-xxx-DV-A, 12 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf.