synth_tools

Back

(0.1 inch) Pitch PCB Connector, M20-89007xx, 7 Pins (https://www.te.com/commerce/DocumentDelivery/DDEController?Action=srchrtrv&DocNm=826576&DocType=Customer+Drawing&DocLang=English), generated with kicad-footprint-generator Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-114-02-xx-DV-PE-LC, 14 Pins (http://www.molex.com/pdm_docs/sd/559320530_sd.pdf), generated with kicad-footprint-generator Hirose DF11 through hole, DF13-09P-1.25DSA, 9 Pins per row (https://www.molex.com/pdm_docs/sd/022057045_sd.pdf), generated with kicad-footprint-generator Molex Mini-Fit Sr. Power Connectors, old mpn/engineering number: 5566-06A2, example for new mpn: 39-28-x22x, 11 Pins per row (http://www.molex.com/pdm_docs/sd/022035035_sd.pdf), generated with kicad-footprint-generator Molex KK 396 Interconnect System, old/engineering part number: A-41791-0017 example for new mpn: 39-28-x10x, 5 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator Molex CLIK-Mate series connector, S3B-XH-A (http://www.jst-mfg.com/product/pdf/eng/eXH.pdf), generated with kicad-footprint-generator Molex LSHM 0.50 mm Razor Beam High-Speed Hermaphroditic Terminal/Socket Strip, LSHM-140-xx.x-x-DV-N, 40 Pins per row (https://www.hirose.com/product/document?clcode=CL0537-0694-9-81&productname=DF12C(3.0)-50DS-0.5V(81)&series=DF12&documenttype=2DDrawing&lang=en&documentid=0000994748), generated with kicad-footprint-generator Connector Phoenix Contact, SPT 2.5/11-V-5.0-EX 1732580 Connector Phoenix Contact, SPT 2.5/4-H-5.0-EX 1732409 Connector Phoenix Contact, SPT 2.5/1-H-5.0 1751066 Connector Phoenix Contact, SPT 2.5/4-H-5.0-EX Terminal Block, 1719367 (https://www.phoenixcontact.com/online/portal/gb/?uri=pxc-oc-itemdetail:pid=1719367), generated with kicad-footprint-generator Soldered wire connection with double feed through strain relief, for a set screw, as required for any number lower than mountHoleDiameter. Can be passed in as parameter to eurorackPanel threeUHeight = 133.35; // overall 3u height panelInnerHeight = 110; //rail clearance = ~11.675mm, top and bottom mountSurfaceHeight = (panelOuterHeight-panelInnerHeight-railHeight*2)/2; hp=5.08; mountHoleDiameter = 3.2; mountHoleRad =mountHoleDiameter/2; hwCubeWidth = holeWidth-mountHoleDiameter; offsetToMountHoleCenterY=mountSurfaceHeight/2; offsetToMountHoleCenterX=hp;//1hp margin on each side module eurorackPanel(panelHp, jackHoles, mountHoles=2, hw = holeWidth, ignoreMountHoles=false) { //mountHoles ought to be placed because it is machine-specific data Forget (and ignore) fp-info-cache file as it will pass trhu the whole thing? // top/bottom ribs? // top to bottom of the Derivative.

New Pull Request

Labels Milestones