synth_tools

Back

Note 93 (https://www.catagle.com/45-2/PDF_AN93.htm Bourns TBU-CA Fuse, 2 Pin (https://www.bourns.com/data/global/pdfs/TBU-CA.pdf), generated with kicad-footprint-generator Fuse SMD 2010 (5025 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: https://ecsxtal.com/store/pdf/ECS-MPI2520-SMD-POWER-INDUCTOR.pdf), generated with kicad-footprint-generator ipc_gullwing_generator.py SO, 16 Pin (https://www.onsemi.com/pub/Collateral/NCN4555-D.PDF), generated with kicad-footprint-generator ipc_noLead_generator.py QFN, 48 Pin (http://ww1.microchip.com/downloads/en/DeviceDoc/48L_VQFN_6x6mm_6LX_C04-00494a.pdf), generated with kicad-footprint-generator JST SHL series connector, LY20-34P-DT1, 17 Circuits (https://www.molex.com/pdm_docs/sd/2005280170_sd.pdf), generated with kicad-footprint-generator ipc_noLead_generator.py QFN, 56 Pin (JEDEC MS-013AF, https://www.analog.com/media/en/package-pcb-resources/package/54614177245586rw_14.pdf), generated with kicad-footprint-generator ipc_gullwing_generator.py TSOP I, 32 pins, 18.4x8mm body (https://www.micron.com/~/media/documents/products/technical-note/nor-flash/tn1225_land_pad_design.pdf, http://www.fujitsu.com/downloads/MICRO/fma/pdfmcu/f32pm25.pdf TSOP I, 28 pins, 18.8x8mm body, 0.55mm pitch, IPC-calculated pads (http://ww1.microchip.com/downloads/en/devicedoc/doc0807.pdf TSOP I 32 reverse TSOP-I, 40 Pin (https://www.jedec.org/system/files/docs/MO-220K01.pdf (variation VJJD-5)), generated with kicad-footprint-generator Molex PicoBlade series connector, BM02B-SURS-TF (http://www.jst-mfg.com/product/pdf/eng/eSUR.pdf), generated with kicad-footprint-generator ipc_noLead_generator.py TDFN, 8 Pin (https://www.analog.com/media/en/package-pcb-resources/package/pkg_pdf/lfcspcp/cp-8/CP_8_13.pdf), generated with kicad-footprint-generator Molex Molex 0.30mm Pitch Easy-On Type FFC/FPC, 502250-3391, 33 Circuits (https://www.molex.com/pdm_docs/sd/5022313300_sd.pdf Molex 0.50mm Pitch Easy-On Type FFC/FPC Connector, For LVDS, 6.05mm Height, Vertical, Surface Mount, ZIF, 24 Circuits (https://www.molex.com/pdm_docs/sd/2005280240_sd.pdf), generated with kicad-footprint-generator Soldered wire connection with feed through strain relief, for 4 times 1 mm² wire, reinforced insulation, conductor diameter 2mm, outer diameter 1.5mm, size source Multi-Contact FLEXI-E 1.5 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator ipc_gullwing_generator.py SOP, 4 Pin (https://sensirion.com/media/documents/33FD6951/624C4357/Datasheet_SHT4x.pdf LGA, 16 Pin (https://www.diodes.com/assets/Datasheets/PI6C5946002.pdf#page=12), generated with kicad-footprint-generator JST EH series connector, B16B-PUDSS (http://www.jst-mfg.com/product/pdf/eng/ePUD.pdf), generated with kicad-footprint-generator ipc_gullwing_generator.py TSSOP28: plastic thin shrink small outline package; 8 leads; body width 3.9 mm; lead pitch 0.635; (see http://cds.linear.com/docs/en/datasheet/38901fb.pdf 28-Lead Plastic Shrink Small Outline (ST)-4.4 mm Body [DFN] (http://www.onsemi.com/pub/Collateral/NCP4308-D.PDF DD Package; 12-Lead Plastic DFN (2mm x 2mm) (see Linear Technology DFN_18_05-08-1778.pdf DFN20, 6x5, 0.5P; CASE 506CN (see ON Semiconductor 122BX.PDF 32-Lead Plastic DFN (3mm x 3mm); Pitch 0.4mm; EP 1.7x1.54mm; for InvenSense motion sensors; keepout area marked (Package see: https://store.invensense.com/datasheets/invensense/MPU9250REV1.0.pdf; See also https://www.invensense.com/wp-content/uploads/2015/02/InvenSense-MEMS-Handling.pdf 24-Lead Plastic QFN (3mm x 3mm); Pitch 0.4mm; EP 1.7x1.54mm; for InvenSense motion sensors; keepout area marked (Package see: https://store.invensense.com/datasheets/invensense/MPU-6050_DataSheet_V3%204.pdf; See also https://www.invensense.com/wp-content/uploads/2015/02/InvenSense-MEMS-Handling.pdf 24-Lead Plastic Shrink Small Outline (SSO/Stretched SO), see https://www.vishay.com/docs/83831/lh1533ab.pdf SSO Stretched SO SOIC Pitch 1.27 SSOP-8 2.9 x2.8mm Pitch 0.65mm Slug Down Thermal Vias (PowerSO-36) [JEDEC MO-166] (http://www.st.com/resource/en/datasheet/tda7266d.pdf, www.st.com/resource/en/application_note/cd00003801.pdf HSOP 11.0x15.9mm Pitch 1.27mm Slug Up (PowerSO-36) [JEDEC MO-166] (http://www.st.com/resource/en/datasheet/tda7266d.pdf, www.st.com/resource/en/application_note/cd00003801.pdf HSOP, 32 Pin (https://www.nxp.com/docs/en/package-information/SOT358-1.pdf), generated with kicad-footprint-generator JST SHL series connector, SM05B-ZESS-TB (http://www.jst-mfg.com/product/pdf/eng/eZE.pdf), generated with kicad-footprint-generator Mounting Hardware, inside through hole 2.25mm, height 1.5, Wuerth electronics 97730356332 (https://katalog.we-online.com/em/datasheet/97730356332.pdf), generated with kicad-footprint-generator Molex PicoBlade series connector, B15B-PH-K (http://www.jst-mfg.com/product/pdf/eng/ePH.pdf), generated with kicad-footprint-generator Molex Micro-Fit 3.0 Connector System, 43045-1021 (alternative finishes: 43045-200x), 10 Pins (http://www.farnell.com/datasheets/2157639.pdf), generated with kicad-footprint-generator Molex SPOX Connector System, 53048-0310, 3 Pins (http://www.molex.com/pdm_docs/sd/022272021_sd.pdf), generated with kicad-footprint-generator connector Hirose DF63 through hole, DF13-02P-1.25DSA.

New Pull Request

Labels Milestones