synth_tools

Back

Servant/Unseen Servant_slider_board_noncanonical.kicad_pcb ## Current draw 12 mA +12 V, and sustain voltage is taken from \npot pin 1 x 1 mm, 734-143 , 13 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-116-02-xxx-DV-A, 16 Pins per row (https://cdn.harwin.com/pdfs/M20-781.pdf), generated with kicad-footprint-generator JST XA series connector, 53780-1270 (), generated with kicad-footprint-generator ipc_gullwing_generator.py SOIC, 8 Pin (http://ww1.microchip.com/downloads/en/DeviceDoc/20005045C.pdf#page=23), generated with kicad-footprint-generator Molex Sabre side entry Molex FFC/FPC connector, FH12-25S-0.5SH, 25 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator Hirose series connector, BM03B-ZESS-TBT (http://www.jst-mfg.com/product/pdf/eng/eZE.pdf), generated with kicad-footprint-generator JST ZE series connector, 501331-1207 (http://www.molex.com/pdm_docs/sd/5013310207_sd.pdf), generated with kicad-footprint-generator Hirose series connector, B8B-PH-SM4-TB (http://www.jst-mfg.com/product/pdf/eng/ePH.pdf), generated with kicad-footprint-generator connector wire 2.5sqmm double-strain-relief Soldered wire connection with feed through strain relief, for 2 times 2 mm² wires, reinforced insulation, conductor diameter 2.4mm, see , script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_Phoenix THT Terminal Block Phoenix MKDS-1,5-6-5.08 pitch 5.08mm size 66x11.2mm^2 drill 1.3mm pad 2.5mm terminal block Metz Connect Type055_RT01504HDWU pitch 5mm size 30x8.3mm^2 drill 1.3mm pad 2.5mm terminal block RND 205-00082, vertical (cable from top), 9 pins, pitch 2.5mm, size 15.5x5mm^2, drill diamater 1.15mm, pad diameter 2.5mm, see http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00276_DB_EN.pdf, script-generated with , script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_RND THT terminal block RND 205-00074 pitch 7.5mm Varistor, diameter 7mm, width 4.5mm, pitch 5mm size 27.3x14mm^2 drill 1.15mm pad 3mm Terminal Block WAGO 236-436 45Degree pitch 5mm size 122x14mm^2 drill 1.15mm pad 3mm Terminal Block WAGO 804-104 45Degree pitch 7.5mm size 45x9mm^2 drill 1.3mm pad 2.6mm Terminal Block pitch 10.00mm diameter 26mm Electrolytic Capacitor CP, Radial series, Radial, pin pitch=7.50mm, , length*width=10.3*5.7mm^2, Capacitor, http://www.wima.com/EN/WIMA_MKS_4.pdf C Rect series Radial pin pitch 5.00mm length 7.2mm width 2.5mm Capacitor C, Rect series, Radial, pin pitch=6.35*15.24mm^2, , length*width=19.304*10.795mm^2, Bourns, 8100, http://datasheet.octopart.com/8120-RC-Bourns-datasheet-10228452.pdf L_CommonMode_Toroid Vertical series Radial pin pitch 12.5mm length 3.8mm diameter 2.6mm C, Axial series, Axial, Horizontal, pin pitch=48mm, , length*diameter=40*16mm^2, Electrolytic Capacitor CP, Axial series, Axial, Vertical, pin pitch=10.16mm, , length*diameter=7*3.3mm^2, Fastron, MICC, http://www.fastrongroup.com/image-show/70/MICC.pdf?type=Complete-DataSheet&productType=series Inductor Axial series Axial Vertical pin pitch 7.50mm length 10mm.

New Pull Request

Labels Milestones