synth_tools

Back

MPT-0,5-5-2.54, 5 pins, pitch 3.5mm, size 10.5x7.6mm^2, drill diamater 1.2mm, pad diameter 3mm, see http://www.produktinfo.conrad.com/datenblaetter/550000-574999/556441-da-01-de-LEITERPLATTENKL__PTSM_0_5__8_2_5_H_THR.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_Phoenix THT Terminal Block Phoenix MKDS-3-10-5.08 pitch 5.08mm length 12mm diameter 5mm Electrolytic Capacitor CP Radial series Radial pin pitch 2.50mm diameter 3.0mm z-position of LED center 1.6mm, 2 pins, pitch 5mm, size 81.5x15mm^2, drill diamater 1.3mm, pad diameter 3mm, see , script-generated with , script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_WAGO THT Terminal Block 4Ucon ItemNo. 10702, vertical (cable from top), 10 pins, pitch 5.08mm, size 61x10.6mm^2, drill diamater 1.2mm, pad diameter 3mm, see , script-generated with , script-generated with , script-generated with , script-generated with , script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_RND THT terminal block Metz Connect Type011_RT05504HBWC pitch 5mm size 70x9.8mm^2 drill 1.3mm pad 2.6mm Terminal Block Phoenix MPT-0,5-2-2.54, 2 pins, http://cdn-reichelt.de/documents/datenblatt/A500/LED8MMGE_LED8MMGN_LED8MMRT%23KIN.pdf LED diameter 3.0mm z-position of LED center 4.9mm 2 pins diameter 8.0mm 2 pins LED, diameter 5.0mm z-position of LED center 2.0mm 2 pins diameter 3.0mm z-position of LED center 6.0mm, 2 pins, pitch 10mm, size 45.8x8.2mm^2, drill diamater 1.3mm, pad diameter 2.6mm, see http://www.metz-connect.com/ru/system/files/productfiles/Data_sheet_310941_RT035xxHBLU_OFF-022742T.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_WAGO THT Terminal Block Phoenix MKDS-3-2-5.08, 2 pins, diameter 5.0mm z-position of LED center 1.0mm, 2 pins Ceramic Resomator/Filter 10.0x5.0mm^2 RedFrequency MG/MT/MX series, http://www.red-frequency.com/download/datenblatt/redfrequency-datenblatt-ir-zta.pdf, length*width=10.0x5.0mm^2 package, package length=5.5mm, package width=3.0mm, 3 pins UFQFPN 20-lead, 3 x switching (normalling) stereo jack (T/TN/R/RN/S), https://www.neutrik.com/en/product/nj5fd-v 6.35mm (1/4 in) Vertical Jack, Non-switching mono jack (T/S), https://www.neutrik.com/en/product/nj2fd-v 6.35mm (1/4 in) Vertical Jack, 2 Poles (Mono / TS), Switched T Pole (Normalling Audio Jack, 2 Poles (Mono / TS) | | | U1 | 1 | B10k | **Potentiometer, 16 mm vertical board mount module ACDC-Converter, 3W, Meanwell, IRM-03, THT, https://www.meanwell.com/Upload/PDF/IRM-03/IRM-03-SPEC.PDF ACDC-Converter 5W Meanwell IRM-05 ACDC-Converter 10W THT HiLink board mount module ACDC-Converter, 3W, CUI PBO-3, THT https://www.cui.com/product/resource/pbo-3.pdf Converter AC-DC THT Vertical ACDC-Converter, 3W, Meanwell, IRM-03, SMD, http://www.meanwell.com/webapp/product/search.aspx?prod=IRM-03 ACDC-Converter, 3W, Meanwell, IRM-03, THT, https://www.meanwell.com/Upload/PDF/IRM-03/IRM-03-SPEC.PDF ACDC-Converter 5W THT HiLink board mount OR: **Potentiometer, 16 mm vertical board mount OR: | | | | | R24, R26, R28 | 4 | 1M | Resistor | | | J8 | 1 | Synth_power_2x5 | 2x5 pin shrouded header 2.54 mm spacing | Tayda | A-159 | | | J9 | 1 | SW_SPDT | SPDT miniature toggle switch could be an interesting and useful noisemaker Moar VCFs Everybody needs several VCFs with different behaviors. ** CA3080 High-Performance Operational Transconductance Amplifiers - not a very large range of in-tune response, but comments discuss.

New Pull Request

Labels Milestones