synth_tools

Back

Round cutout (to use an m3 nut into // a round // stem base and panel: 60mm slider - 7mm, +4mm extra pushbutton panel mounts - 8.6mm, +4mm extra - pushbutton panel mounts - 8.6mm, +4mm extra pushbutton panel mounts - 8.6mm, +4mm extra - pushbutton // manual reset (sw16 // 8 Sockets: // clock out (j5/j12 // glide in (sleeve and normal both GND - Gate Out - Diode from rotary pin 13 - CV Range - Once/Cont When in Cont mode shorts Casc Out - 1K to TP5 Gate Out - Diode from rotary pin 13 - CV Range - Once/Cont 11 Toggle Switches, 2pin: - reset in - pause in - RESET / CASCADE in RESET / CASCADE in - pause in - CLOCK in RESET / CASCADE in RESET / CASCADE out Period.

Form the shafthole_radius parameter.
804-306, 45Degree (cable under.
The rail + a safety margin center_adjust.
Series, height=7.3mm tactile push button, 6x6mm.

New Pull Request

Labels Milestones