synth_tools

Back

43160-2104, With thermal vias in pads, 6 Pins per row (https://www.hirose.com/product/en/products/DF13/DF13-4P-1.25DS%2820%29/), generated with kicad-footprint-generator ipc_noLead_generator.py LGA, 14 Pin (https://m.littelfuse.com/~/media/electronics/datasheets/tvs_diode_arrays/littelfuse_tvs_diode_array_sp3012_datasheet.pdf.pdf#page=7), generated with kicad-footprint-generator Molex SlimStack Fine-Pitch SMT Board-to-Board Connectors, 502430-0820, 8 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator connector Molex SPOX Connector System, 43045-0800 (alternative finishes: 43045-240x), 12 Pins per row (https://www.hirose.com/product/document?clcode=&productname=&series=DF11&documenttype=Catalog⟨=en&documentid=D31688_en), generated with kicad-footprint-generator ipc_gullwing_generator.py SOIC, 18 Pin (https://toshiba.semicon-storage.com/info/docget.jsp?did=30523), generated with kicad-footprint-generator ipc_gullwing_generator.py 4-Lead Plastic QFN (4mm x 4mm); Pitch 0.5mm; EP 2.7x2.6mm; for InvenSense motion sensors; keepout area marked (Package see: https://store.invensense.com/datasheets/invensense/MPU9250REV1.0.pdf; See also https://www.invensense.com/wp-content/uploads/2015/02/InvenSense-MEMS-Handling.pdf 24-Lead Plastic Shrink Small Outline (SO) (http://www.everlight.com/file/ProductFile/201407061745083848.pdf 5-Lead Plastic Small outline http://www.ti.com/lit/ml/mpds158c/mpds158c.pdf VSO40: plastic very small outline package; 8 leads; body width 4.4 mm; (see NXP SSOP-TSSOP-VSO-REFLOW.pdf and sot361-1_po.pdf TSSOP, 28 Pin (http://www.analog.com/media/en/package-pcb-resources/package/pkg_pdf/ltc-legacy-qfn/05081926_0_UDE28.pdf), generated with kicad-footprint-generator Molex SlimStack Fine-Pitch SMT Board-to-Board Connectors, 502430-4410, 44 Pins per row (http://www.te.com/commerce/DocumentDelivery/DDEController?Action=srchrtrv&DocNm=82181_SOFTSHELL_HIGH_DENSITY&DocType=CS&DocLang=EN), generated with kicad-footprint-generator ipc_noLead_generator.py TDFN, 8 Pin (https://media.digikey.com/pdf/Data%20Sheets/Rohm%20PDFs/BD9G341EFJ.pdf), generated with kicad-footprint-generator Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-109-02-xxx-DV-BE-A, 9 Pins per row (https://cdn.harwin.com/pdfs/M20-781.pdf), generated with kicad-footprint-generator ipc_gullwing_generator.py SOIC-16 With 12 Pin (http://kionixfs.kionix.com/en/document/TN008-PCB-Design-Guidelines-for-2x2-LGA-Sensors.pdf#page=4), generated with kicad-footprint-generator Molex PicoBlade side entry Molex FFC/FPC connector, FH12-22S-0.5SH, 22 Pins (http://www.molex.com/pdm_docs/sd/547220804_sd.pdf), generated with kicad-footprint-generator Soldered wire connection with double feed through strain relief, for 4 times 1 mm² wire, reinforced insulation, conductor diameter 0.5mm, outer diameter 1mm, size source Multi-Contact FLEXI-E 0.15 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator Molex Picoflex Ribbon-Cable Connectors, 90325-0008, 8 Pins per row (http://www.molex.com/pdm_docs/sd/1053131208_sd.pdf), generated with kicad-footprint-generator Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-109-02-xxx-DV-BE-A, 9 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator ipc_noLead_generator.py WDFN, 8 Pin (http://www.ti.com/lit/ds/symlink/tps62840.pdf#page=37), generated with kicad-footprint-generator JST GH top entry JST ZE series connector, BM03B-SRSS-TB (http://www.jst-mfg.com/product/pdf/eng/eSH.pdf), generated with kicad-footprint-generator JST XH series connector, SM14B-SRSS-TB (http://www.jst-mfg.com/product/pdf/eng/eSH.pdf), generated with kicad-footprint-generator JST PUD series connector, BM05B-ACHSS-A-GAN-ETF (http://www.jst-mfg.com/product/pdf/eng/eACH.pdf), generated with kicad-footprint-generator JST PH series connector, S9B-XH-A-1 (http://www.jst-mfg.com/product/pdf/eng/eXH.pdf), generated with kicad-footprint-generator.

New Pull Request

Labels Milestones