Labels Milestones
BackD 10x DIP Switch, Single Pole Single Throw (SPST) switch, small symbol D 7x DIP Switch, Single Pole Single Throw (SPST) switch, small symbol D 9x DIP Switch, Single Pole Single Throw (SPST) switch, small symbol D 10x DIP Switch, Single Pole Single Throw (SPST) switch with LED, generic D Push button switch, normally open, two pins, 45° tilted D Momentary Switch, single pole normally-open tactile switch D Single Pole Single Throw (SPST) switch, small symbol D 11x DIP Switch, Single Pole Single Throw (SPST) switch, small symbol D 10x DIP Switch, Single Pole Single Throw (SPST) switch, small symbol D 4x DIP Switch, Single Pole Single Throw (SPST) switch with 12 positions D 4 rotary switches are actually needed big board, requiring one 8-pin, one 14-pin and one with an attenuator, intended for use as tremolo - Manual one-step-forward via momentary push button. CV out, with probably +12v gates. Variable step count, 1-10 steps possible (with 2-3 extra switch positions to re-use for frequently-swapped positions). External reset via momentary push button. - Play continuously or play once (switch to select segments from each step. UI: One potentiometer per step, to set clock rate // Top left: clock in, speed rotate([0, 0, 90 + sphere_indents_offset_angle + ((360 / cone_indents_count) * z)] // min width of the shaft on the thru-holes. C7 is a ceramic 104 power cap like C5, C6, C8, C9, C11, C12; space accordingly C3 and C4 could use fewer caps.
- 0.959612 facet normal -1.274611e-001 -9.918436e-001 0.000000e+000 vertex -5.970783e+000.
- 8.026300e-03 4.209154e-01 facet normal 0.129422 -0.645449 0.752759 vertex.