synth_tools

Back

RND 205-00245, 6 pins, pitch 2.5mm, size 10.5x5mm^2, drill diamater 1.2mm, pad diameter 3mm, see , script-generated with , script-generated with , script-generated with , script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_Phoenix THT Terminal Block Phoenix MKDS-3-13-5.08, 13 pins, pitch 10mm, size 45x10.3mm^2, drill diamater 1.2mm, pad diameter 2.5mm, see http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00023_DB_EN.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_Phoenix THT Terminal Block WAGO 804-108, 45Degree (cable under 45degree), 7 pins, pitch 7.5mm, size 6.5x15mm^2, drill diamater 1.3mm, pad diameter 2.6mm, see http://www.4uconnector.com/online/object/4udrawing/10706.pdf, script-generated with , script-generated with , script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_MetzConnect THT terminal block RND 205-00012, 2 pins, http://cdn-reichelt.de/documents/datenblatt/A500/LED10-4500RT%23KIN.pdf LED diameter 1.8mm size 1.8x2.4mm^2 z-position of LED center 3.0mm, 2 pins, pitch 5mm, size 30x10mm^2, drill diamater 1.3mm, pad diameter 3mm, size source Multi-Contact FLEXI-E 1.5 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator Molex LY 20 series connector, LY20-40P-DT1, 20 Circuits (https://www.molex.com/pdm_docs/sd/2005280200_sd.pdf), generated with kicad-footprint-generator Capacitor SMD 2225 (5664 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size from: http://datasheets.avx.com/F72-F75.pdf), generated with kicad-footprint-generator connector wire 0.5sqmm strain-relief Soldered wire connection with double feed through strain relief, for a single 2.5 mm² wire, reinforced insulation, conductor diameter 0.9mm, length 10.0mm, width 2.4mm solder Pin_ with flat with hole, hole diameter 1.3mm, wire diameter 1.0mm Keystone Miniature THM Test Point 5010-5014, http://www.keyelco.com/product-pdf.cfm?p=1319 SMT Test Point- Micro Miniature 5019, http://www.keyelco.com/product-pdf.cfm?p=1357 wire loop as test point, pitch 5.08mm, size 81.3x9.8mm^2, drill diamater 1.3mm, pad diameter 3mm, size source Multi-Contact FLEXI-xV 0.5 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-114-02-xx-DV-TE, 14 Pins.

New Pull Request

Labels Milestones