synth_tools

Back

Section 6.2 of http://www.st.com/resource/en/datasheet/stm32f746zg.pdf TFBGA-265, 17x17 raster, 14x14mm package, pitch 0.4mm; see section 7.4 of http://www.st.com/resource/en/datasheet/stm32l152zc.pdf WLCSP-64, 8x8 raster, 3.623x3.651mm package, pitch 0.4mm; see section 10.3 of https://www.parallax.com/sites/default/files/downloads/P8X32A-Propeller-Datasheet-v1.4.0_0.pdf QFN, 48 Pin (https://www.onsemi.com/pub/Collateral/485BA.PDF), generated with kicad-footprint-generator Resistor SMD 01005 (0402 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: IPC-SM-782 page 72, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-134-02-xxx-DV, 34 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xx-dv-xe-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-thru.pdf), generated with kicad-footprint-generator Molex Sabre Power Connector, 46007-1103, 3 Pins per row (https://www.hirose.com/product/en/products/DF63/), generated with kicad-footprint-generator Soldered wire connection, for 2 times 1.5 mm² wires, basic insulation, conductor diameter 0.5mm, outer diameter 2.1mm, see http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00232_DB_EN.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_RND THT terminal block RND 205-00066 45Degree pitch 5mm size 50x9mm^2 drill 1.3mm pad 2.6mm Terminal Block Phoenix PTSM-0,5-8-2.5-V-THR, vertical (cable from top), 8 pins, pitch 5.08mm, size 40.6x11.2mm^2, drill diamater 1.15mm, pad diameter 2.5mm, see http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00287_DB_EN.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_Phoenix THT Terminal Block WAGO 236-506 45Degree pitch 5mm size 55x8.1mm^2 drill 1.3mm pad 2.5mm terminal block Metz Connect Type059_RT06305HBWC pitch 3.5mm size 21x6.5mm^2 drill 1.2mm pad 2.4mm Terminal Block WAGO 236-404 45Degree pitch 10mm size 65x10.3mm^2 drill 1.3mm pad 2.5mm terminal block RND 205-00299, 3 pins, pitch 2.5mm, size 12.2x10mm^2, drill diamater 1.2mm, pad diameter 2.6mm, see http://www.metz-connect.com/de/system/files/productfiles/Datenblatt_310671_RT019xxHDWC_OFF-023605N.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_RND THT terminal block RND 205-00033, 12 pins, pitch 10.2mm, size 25.4x8.3mm^2, drill diamater 1.3mm, pad diameter 2.5mm, see http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00298_DB_EN.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_RND THT terminal block Metz Connect Type055_RT01503HDWU pitch 5mm Varistor, diameter 9mm, width 3.4mm, pitch 5mm size 50x8.1mm^2 drill 1.1mm pad 2.1mm Terminal Block Phoenix MKDS-3-5-5.08, 5 pins, pitch 5.08mm, hole diameter 1.3mm, length 11.3mm, width 3.0mm solder Pin_ with flat with fork, hole diameter 2.8mm SMD rectangular pad as test point, loop diameter 3.8mm, hole diameter 1.3mm, wire diameter 1.0mm test point plated hole Plated Hole as test Point, square 1.5mm side length SMD rectangular pad as test point, pitch 6.35mm, hole diameter 1.0mm, wire diameter 1.0mm wire loop bead wire loop as test Point, square 2.5mm side length, hole diameter 1.0mm Keystone Miniature THM Test Point 5005-5009, http://www.keyelco.com/product-pdf.cfm?p=1314 Keystone Miniature THM Test Point 5005-5009, http://www.keyelco.com/product-pdf.cfm?p=1314 Keystone Miniature THM Test Point 5000-5004, http://www.keyelco.com/product-pdf.cfm?p=1309 Through Hole Mount Test Points Keystone Miniature THM Test Point 5000-5004, http://www.keyelco.com/product-pdf.cfm?p=1309 Through Hole Mount Test Points Keystone Miniature THM Test Point 5000-5004, http://www.keyelco.com/product-pdf.cfm?p=1309 Through.

New Pull Request

Labels Milestones