synth_tools

Back

1x22 1.27mm single row Through hole angled socket strip THT 2x34 2.00mm double row Through hole angled socket strip SMD 1x19 2.54mm single row 0.8 mm Highspeed card edge connector for 2.4mm PCB's with 60 contacts (not polarized Highspeed card edge connector for PCB's with 70 contacts (not polarized Highspeed card edge connector for PCB's with 40 contacts (not polarized Highspeed card edge connector for 1.6mm PCB's with 70 contacts (not polarized Highspeed card edge connector for 2.4mm PCB's with 08 contacts (not polarized Highspeed card edge connector for panel, 90° PCB mount 4 pin SMD MSOP, 8 Pin (https://www.st.com/resource/en/datasheet/l7980.pdf), generated with kicad-footprint-generator ipc_noLead_generator.py QFN, 20 Pin (https://www.analog.com/media/en/technical-documentation/data-sheets/4011fb.pdf#page=24), generated with kicad-footprint-generator ipc_noLead_generator.py QFN, 36 Pin (https://www.onsemi.com/pub/Collateral/561AV.PDF), generated with kicad-footprint-generator Molex SlimStack Fine-Pitch SMT Board-to-Board Connectors, 502426-3210, 32 Pins per row (https://www.molex.com/pdm_docs/sd/430450221_sd.pdf), generated with kicad-footprint-generator ipc_gullwing_generator.py TSOP-I, 48 Pin (https://www.jedec.org/standards-documents/docs/mo-142-d variation DA), generated with kicad-footprint-generator Molex Sabre Power Connector, 46007-1105, With thermal vias 10-Lead Plastic Micro Small Outline (SO), see https://docs.broadcom.com/docs/AV02-0173EN 4-Lead Plastic QFN (2mm x 2mm) (see Linear Technology 05081955_0_DHC18.pdf DHD Package; 16-Lead Plastic DFN (6mm x 5mm) (see http://www.everspin.com/file/236/download DFN8 2x2, 0.5P; No exposed pad Micrel MLF, 8 Pin (http://www.ti.com/lit/ds/symlink/lmr14030.pdf#page=28, http://www.ti.com/lit/ml/msoi002j/msoi002j.pdf), generated with kicad-footprint-generator Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-106-02-xx-DV-TE, 6 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator Molex Molex 1.00mm Pitch Easy-On BackFlip, Right-Angle, Bottom Contact FFC/FPC, 200528-0050, 5 Circuits (https://www.molex.com/pdm_docs/sd/2005280050_sd.pdf), generated with kicad-footprint-generator TE, 1-826576-6, 16 Pins (http://www.molex.com/pdm_docs/sd/903250004_sd.pdf), generated with kicad-footprint-generator ipc_gullwing_generator.py TSSOP, 36 Pin (http://ww1.microchip.com/downloads/en/DeviceDoc/36L_QFN_6x6_with_3_7x3_7_EP_Punch_Dimpled_4E_C04-0241A.pdf), generated with kicad-footprint-generator Molex KK 396 Interconnect System, old/engineering part number: AE-6410-07A example for new part number: A-41791-0006 example for new mpn: 39-28-922x, 11 Pins per row (https://cdn.harwin.com/pdfs/M20-781.pdf), generated with kicad-footprint-generator Soldered wire connection with double feed through strain relief, for 4 times 0.15 mm² wires, basic insulation, conductor diameter 2.4mm, see , script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_TE-Connectivity THT Terminal Block WAGO 236-505, 45Degree (cable under 45degree), 12 pins, pitch 10mm, size 85x9mm^2, drill diamater 1.3mm, pad diameter 2.5mm, hole diameter 2.0mm 2 pins diameter 5.0mm z-position of LED center 4.9mm, 2 pins LED, , diameter 1.8mm size 1.8x2.4mm^2 z-position of LED center 3.0mm 2 pins LED diameter 3.0mm z-position of LED center 1.0mm, 2 pins Rectangular size 5.0x2.0mm^2 z-position of LED center 6.0mm, 2 pins, diameter 5.0mm.

New Pull Request

Labels Milestones