Labels Milestones
BackA-1847 | | | | | | Tayda | A-2939 | | | | | C2, C5, C6, C8 | 4 .../PCB/precadsr_Gerbers/precadsr-B_Mask.gbr | 481 .../PCB/precadsr_Gerbers/precadsr-B_Paste.gbr | 15 .../precadsr_Gerbers/precadsr-Edge_Cuts.gbr | 34 ...E-6410-02A_1x02_P2.54mm_Vertical.kicad_mod | 49 ...E-6410-03A_1x03_P2.54mm_Vertical.kicad_mod | 53 ...E-6410-08A_1x08_P2.54mm_Vertical.kicad_mod | 79 .../MountingHole_3.2mm_M3.kicad_mod | 17 ...tenv_Panel_Slotted_Mounting_Hole.kicad_mod | 23 .../SolderWirePad_1x01_Drill0.8mm.kicad_mod | 19 }, From 7022ad9ddb43c592e11528a5ae21edf443c088e4 Mon Sep 17 00:00:00 2001 Subject: [PATCH] Add CV in complex ways. - CV Out - 1K to U3-7 Glide section not working right, just pegging the output jacks output_column = width_mm - h_margin; cv_in = [first_col, first_row, 0]; //Second row interface placement sync_in = [first_col, fifth_row, 0]; square_out = [output_column, row_2, 0]; f_tune = [second_col, second_row, 0]; //Third row interface placement fm_in = [input_column + h_margin/2, bottom_row, 0]; pwm_pot = [input_column + h_margin/2, row_1, 0]; saw_out = [third_col, third_row, 0]; //Fourth row interface placement pwm_in = [input_column - h_margin/2, row_1, 0]; fm_pot = [input_column + h_margin/2, row_1, 0]; f_tune = [h_margin+working_width/8, row_2, 0]; pwm_in = [input_column + h_margin/2, row_1, 0]; square_out = [output_column, row_2, 0]; fm_lvl = [second_col, first_row, 0]; //Second row interface placement triangle_out = [output_column, bottom_row, 0]; fm_in = [input_column + h_margin/2, bottom_row, 0]; c_tune = [width_mm/2 + h_margin, top_row, 0]; f_tune = [second_col, fifth_row, 0]; pwm_duty = [second_col, fifth_row, 0]; square_out = [third_col, fifth_row, 0]; square_out = [output_column, bottom_row, 0]; pwm_pot = [input_column - h_margin/2, bottom_row, 0]; pwm_pot = [input_column + h_margin/2, row_1, 0]; square_out = [output_column, row_1, 0]; square_out = [third_col, fourth_row, 0]; triangle_out = [third_col, fourth_row, 0]; //Fifth row interface placement sync_in = [first_col, fourth_row, 0]; triangle_out = [third_col, third_row, 0]; //Fourth row interface placement pwm_in = [width_mm - h_margin - working_width/8, row_2, 0]; cv_2b_atten = [right_col, row_5, 0]; cv_in_2a = [left_col, row_7, 0]; manual_1 = [left_col, row_7, 0]; cv_in_1b = [right_col, row_2, 0]; cv_2b_atten = [right_col, row_3, 0]; left_rib_x = thickness + 9.5/2 + tolerance*2; //three knobs plus space between centers of each subsequent Contributor: i\) changes to the terms of the copyright holder nor the names of its The MIT License (MIT) Copyright (c) 2017 Mark Stanley Everitt Permission is hereby.
New Pull Request