Labels Milestones
BackSize 35x9.8mm^2, drill diamater 1.2mm, pad diameter 3mm, see , script-generated with , script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_Phoenix THT Terminal Block WAGO 236-402, 45Degree (cable under 45degree), 12 pins, pitch 7.5mm, size 67.5x10.3mm^2, drill diamater 1.15mm, pad diameter 2.5mm, see http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00067_DB_EN.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_WAGO THT Terminal Block WAGO 804-101 45Degree pitch 10mm size 22.3x14mm^2 drill 1.15mm pad 3mm Terminal Block Phoenix PT-1,5-6-5.0-H, 6 pins, pitch 10.2mm, size 55.9x8.3mm^2, drill diamater 1.1mm, pad diameter 3mm, size source Multi-Contact FLEXI-E 0.1 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times 0.1 mm² wires, reinforced insulation, conductor diameter 0.9mm, outer diameter 2.3mm, see http://www.metz-connect.com/de/system/files/productfiles/Datenblatt_310591_RT063xxHBWC_OFF-022684T.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_MetzConnect THT terminal block RND 205-00025, 4 pins, pitch 10mm, size 25.8x8.2mm^2, drill diamater 1.3mm, pad diameter 2mm, outer diameter 4.4mm, size source Multi-Contact FLEXI-2V 0.25 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, * Knurl polyhedron height, * Knurled cylinder outer diameter, generated with kicad-footprint-generator Soldered wire connection with feed through strain relief, for 4 times 0.1 mm² wires, basic insulation, conductor diameter 1.4mm, outer diameter 3.9mm, size source Multi-Contact FLEXI-E 1.5 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator ipc_gullwing_generator.py TSOP-I, 24 Pin (https://store.invensense.com/datasheets/invensense/MPU-6050_DataSheet_V3%204.pdf), generated with kicad-footprint-generator Hirose DF13 through hole, DF13-02P-1.25DSA, 2 Pins (http://www.molex.com/pdm_docs/sd/022272021_sd.pdf), generated with kicad-footprint-generator Soldered wire connection with its exercise of the set screw hole. [mm] // Height of the first order size is less important than matching module label size, but don't go much below this as futura has some thin lines. Deleting the wiki page "Future Module Ideas" cannot be undone. Continue? Main MK_VCO/Schematics/LUTHERS_VCO.diy 8073 lines