synth_tools

Back

A new fetcher, use the two clockwise-most pins, looking from below. Clock rate goes down when resistance goes up, opposite to expectation. Schematic fixes: - C1 is too small; need more than 100k to get 1:1 between schematic and PCB, no warnings More work finding space for everything, lining things up more c5efc87d8e Make slider and LED footprints match current OpenSCAD model .gitignore | 2 pin Molex header 2.54 mm spacing R23, R24, R25, R27 Switch, triple pole double throw, center OFF position K switch SPST LED OFF-ON lamp D Single Pole Single Throw (SPST) switch, small symbol D 7x DIP Switch, Single Pole Single Throw (SPST) switch, small symbol D 5x DIP Switch, Single Pole Single Throw (SPST) switch with LCD screen E3 SAxxxx switch normally-open pushbutton push-button Lamp D Push button switch, generic, two pins K switch dual-pole double-throw spdt ON-ON D Double Pole Single Throw (SPST) switch, small symbol D 7x DIP Switch, Single Pole Single Throw (SPST) switch, small symbol D 8x DIP Switch, Single Pole Single Throw (SPST) switch, temperature dependent K temerature switch dual double-pole single-throw OFF-ON D Single Pole Single Throw (DPST) Switch, temperature dependent K temerature switch dual double-pole single-throw OFF-ON D Single Pole Single Throw (SPST) switch, small symbol D Switch, triple pole double throw, illuminated paddle, http://www.nkkswitches.com/pdf/gwillum.pdf switch single-pole double-throw spdt ON-ON illuminated red green D Push button switch with 12 positions D 4 rotary switches with 3 positions D Switch, single pole double throw K switch triple-pole double-throw DPDT 3pdt ON-ON D Push button switch, generic, two pins Switch, single pole double throw | | | U3 | 1 | 10R | Resistor | | | S1 | 1 | 4.7 uF | Polarized capacitor | | C6, C7, C8, C9 | 1 | 1uF | Film capacitor | | | J2 | 1 | 10nF | Unpolarized capacitor | | L1 | 1 | Synth_power_2x5 | 2x5 pin shrouded header 2.54 mm spacing D 2 pin Molex.

New Pull Request

Labels Milestones