Labels Milestones
Back!A.isPlated()" (condition "A.Type == 'pad' && B.Type == 'track'" condition "A.Type == 'via' && B.Type == A.Type")) # 4-layer condition "A.Type == 'pad' && !A.isPlated()" condition "A.isPlated() && B.Type == A.Type && A.Net == B.Net" (condition "A.Type == 'via' && B.Type == A.Type && A.Net != B.Net" condition "A.Type == 'via' && B.Type == A.Type && A.Net == B.Net" condition "A.Type == 'track' && B.Type == 'graphic')" (condition "A.Type == 'track' && B.Type == 'track'" condition "A.Type == 'track'")) # This would override board outline and milled areas # (condition "A.Type == 'track'" condition "A.Type == 'via'" condition "A.Type == 'pad' && A.Fabrication_Property == 'Castellated pad'" condition "A.Net != B.Net" condition "A.Type == 'via' && B.Type == A.Type && A.Net == B.Net" (condition "A.Type == 'track' && B.Layer == 'Edge.Cuts'" condition "A.Type == 'pad' && B.Type == A.Type && A.Net == B.Net" (condition "A.Type == 'track' && B.Type == 'track'" ; DRILL file {KiCad 5.1.10-88a1d61d58~90~ubuntu20.04.1} date Sat Aug 7 13:39:59 2021 ; DRILL file {KiCad 7.0.11-7.0.11~ubuntu22.04.1} date Tue Mar 5 20:19:51 2024 Copper Layer Stackup: ============================================================= L1 : F.Cu front L2 : B.Cu back Drill file 'precadsr-panel.drl' contains plated through holes: ============================================================= T1 3.200mm 0.1260" (4 holes) T5 15.200mm 0.5984" (1 hole T3 7.000mm 0.2756" (6 holes) T4 10.000mm 0.3937" (4 holes T5 15.200mm 0.5984" (1 hole) T3 7.000mm 0.2756" (6 holes) T4 10.000mm 0.3937" (4 holes T5 15.200mm 0.5984" (1 hole T3 7.000mm 0.2756" (6 holes T4 10.000mm 0.3937" (4 holes) T5 15.200mm 0.5984" (1 hole) T3 7.000mm 0.2756" (6 holes) T4 10.000mm 0.3937" (4 holes T5 15.200mm 0.5984" (1 hole Total plated holes count 0 Hardware/Panel/precadsr-panel-Gerbers/precadsr-panel-CmtUser.gbr Normal file Unescape Hardware/PCB/precadsr/ao_tht.pretty/PinHeader_1x02_P2.54mm_Vertical.kicad_mod Normal file Unescape Hardware/Panel/precadsr_panel_al/precadsr_panel_al.sch Normal file Unescape Schematics/Unseen Servant/Unseen Servant.kicad_sch | 26 .../precadsr-panel-CmtUser.gbr | 209 .../precadsr-panel-CuBottom.gbl | 970 .../precadsr-panel-EdgeCuts.gm1 | 26 .../precadsr-panel-CmtUser.gbr | 209 .../precadsr-panel-CuBottom.gbl | 970 .../precadsr-panel-CuTop.gtl | 970 .../precadsr-panel-EdgeCuts.gm1 | 26 .../precadsr_panel_al-F_Cu.gbr | 15 .../precadsr_panel_al-F_Mask.gbr | 47 .../precadsr-panel.gbrjob | 126 .../precadsr-panel/precadsr-panel-cache.lib .
- Needed a nut behind the front.
- 5W, length*diameter=20*9mm^2, http://www.vishay.com/docs/20128/wkxwrx.pdf Resistor Axial_DIN0414.